inTuiT 511286 QuickBooks Power Stand User Manual
- June 6, 2024
- inTuiT
Table of Contents
inTuiT 511286 QuickBooks Power Stand
QuickBooks Power Stand (511286) Specifications
- Rated Capacity: 3.7Vdc, 4800mAh, 17.76Wh
- Upper Type-C Output: 5Vdc, 1.5A (3000mAh)
- Upper Type-C Input: 5Vdc, 3.0A, Lower Type-C Input: 5Vdc, 3.0A
- Total Input: 5Vdc, 3.0A
- Operational temperature: 0°C to 45°C
Battery Warnings
There are no user-serviceable parts inside this unit.
Do not replace the batteries inside the unit. This may result in a risk of
explosion. Do not crush or puncture the batteries, subject the unit to fire or
extreme heat, or expose the unit to extreme low air pressure. These conditions
may result in an explosion or the leakage of flammable liquid or gas.
FCC Compliance Statements
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Note: this equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures: Reorient or relocate
the receiving antenna; Increase the separation between the equipment and the
receiver; Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected; Consult the dealer or an experienced
radio/TV technician for help.
When the device is running, keep a minimum distance of 20 cm away from it.