Spardar R8-Climber Intelligent Early Childhood Educational Robot Instruction Manual
- June 6, 2024
- Spardar
Table of Contents
Spardar R8-Climber Intelligent Early Childhood Educational Robot
Thismanual introduces thebasicuse methods and common problemsofeducational robots,helpsyou quickly understand andfamiliarizeyourselfwith robots, andguides you to use robots
Buttons and instructions
Button definition
VOICE INTERACTION
Wake word:·Alexa· The system prompts”When”and then vice commands,like”sing a
song”or “tella story.·
OVER HEAD TOUCH KEY
- lnthe conversation,Shortpress :Shopthe conversation lnthe states
- ,Shortpress:WakeupRobot,
- youcanhavea conversationlongpress:Close\Opendance moves.
- (When therobotis dancing ,longpress the top of the robotto stop dancing.
- (ongpressagain,the robot will continue to dance.
DIRECTOR KEY lfthetrackis playing , short press: switch directory (Tagging: whentherobotisin standby-mode.shortpress the directory keyto continue to play the lastplayeddirectory)
NETWORK VOLUME KEY
- long press(Leftear key): Enterconfiguration network mode (Configurenetworkthroughapp)
- Short press: Adjust the volume to increase
VOLUME KEY
Shortpress:(Right earkey ): Adjustthevolumeto decrease Holddowntherightear
button lortwosecondsandreleaseit totumofftherobot’s
eyelight.Holddowntherightear button loranothertwosecondsand release
ittoturnonthe light
Eyelight function definition(Eyeindicator)
- Red light : Charging
- Bluelight:Fully charged
- Greenlight:voicemonitoringcannot dance
- Pink light:Long light represents group dance state
- Peach,pink and flickeredaltemately:Amazon P!atformisnotauthorized(Theeyelightwillbepink aftertheauthorizationis completed
NETWORK CONNECTION
- Click onSoundWaveto configure the network
- EntertheWifiname andpassword ,click play (Mobi phone 1drobatsne_dto, th
- Long press the therobot’sleftearbuttonto connect tothe network
EQUIPMENT BUINDING
- 0pen the app lhatcontrolsthe robot,
- Click onmyrobot 2. Clickaddrobot
- .Select the robot tobe connected and clicked, Connect robot successfully.
AUTHORIZATION BY AMAZON
- Click onan unauthorized robot
- Choose your region,dickset server endpoint
- Click authorize Alexa
- Log into yourAmazonaccount
- Longpressthepaste code,clickto continue 6.Click Alexa authorize
- Click allow
- Select your country/region,clickNextandthe authorization is successful (Theeye lightwillbepinkalterthe authorization is completed)
COMMON PROBLEM
Note: the above problems can not be solved.please contact the manufacturer. Non-professionals are forbidden to disassemble by themselves
BASIC PROBLEM
Educational robot• The climber Product warranty card
Warranty Treaty:
lnordertoenableyouto enjoyhighqualityeffects for many years to
come,wemakesurethatthere are no equipment defects when the equipment leaves
the factory , With a 12- month warrantyperiodfromthe date of purchase The
warranty products shallbe guaranteed according to the following terms with
thevalid sales certificate and this warrantycertificate whentheyaresentfor
repair
- Your equipment mustbeused correctly according to the product manual ;
- Thisguarantees are not applicable tolailuresor damage causedbypeople, accidents (fire,externalforce extrusion. falling, etc.)ornatural disasters(earthquake.typhoon. lightning.etc.):
- After the warranty cardislost.no reissue,please keep it with the sales voucher.
FCC STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>