Nidec Sankyo ICM0M002A-M RFID Module User Manual
- June 6, 2024
- Nidec Sankyo
Table of Contents
User Manual
Since this module is not sold to general end-users directly, there is no user manual of the module. For the details about this module, please refer to the specification sheet of the module. This module should be installed in the host device according to the interface specification. (installation procedure). The following information must be indicated on the host device of this module;
[for FCC]
Contains Transmitter Module FCC ID: WJ6ICM0M002A-M or Contains FCC ID:
WJ6ICM0M002A-M.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
*If it is difficult to describe this statement on the host device due to the size, please describe it in the user’s manual and also either describe it on the device packaging or on a removable label attached to the device. The following statements must be described on the user manual of the host device of this module;
FCC CAUTION
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment. This
transmitter must not be co-located or operated in conjunction with any other
antenna or transmitter.