WXYT M11-B 2.4G Wireless Microphone User Manual
- June 6, 2024
- WXYT
Table of Contents
WXYT M11-B 2.4G Wireless Microphone
Charging Case
Specification
- Charging Case Battery: 1200mAh
- Charging Current: DC-5V 1 A (MAX)
- Standby Current: 100uA
Microphone Wireless Transmitter
- Charging current: 50mA
- Working Time: 7-8H
- Transmitting distance: 10M
- Transmitting delay: 30ms
- ENC: Dual MIC ENC
- ENC depth: -25DB
- Sensitivity: – 42dB±1 dB
- SNR(Signal to Noise Ratio): 56 dB
- Sampling rate: 16KHZ
- Battery capacity: 55mAh
- Microphone: Dual MEMS Silicone Microphone
- Wireless transmission frequency: 2.4Ghz
Microphone Wireless Receiver
- Wireless transmission frequency: 2.4G
- Transmitting Distance: 10M
- Power Supply: USB OTG SV Power Supply
- Working current: 22mA
Operation
Connect with TYPE-C Device
-
Power On
Long press the Switch Button of Transmitter The lights flash alternately to indicate”Power on” successfully -
Connect between Receiver and Terminal Device
Plug the Receiver to the device with Type-C port The indicator of Receiver turns on, means”Power on” successfully
Notes: -
The mobile phone must have a TYPE-C interface and OTG function to enable the Receiver.
-
Under the default status of some mobile phone brands (OPPO, ONE PLUS, VIVO, ETC.), The OTG function of the system is turned off and needs to be turned on in the system settings to enable the Receiver.
-
To connect with Apple mobile phone, need to use with the OTG Adapter (Type-C Female to Lightning Plug Male)
-
To connect with PC,need to use with the OTG Adapter (Type-C Female to USB-A Plug Male)
-
Connect between Receiver and Transmitter
When Receiver and Transmitter are under working status, the lights of both Receiver and Transmitter keep on, means “connected”successfully and ready to work.
Notes: -
After Transmitter and Receiver are successfully connected, on the Android system, the microphone Transmitter will completely replace the microphone and speaker of the phone, including calls and all APP applicathon scenarios. To use the microphone and speaker on the phone, the Receiver must be unplugged.
-
On the 10S system, the microphone Transmitter will partially replace the microphone and speaker of the mobile phone. For all APP application scenarios except for calls (GSM calls), to use the microphone and speaker of the mobile phone, the Receiver must be unplugged.
-
The built-in camera APP of some mobile phones can only use the micropphone of the mobile phone, and this product cannot be used as a recording device, In this case, you can use a third-party camera APP.
After-sale service
We provides full refund or replacement without no reasons within 30 days + 1
year warranty+ Lifelong Technical Support
[email protected]
Please be confident that Seller support is just a mail away from you in case
you find any difficulty. Kindly do not hesitate to write back to us if you
need any clarification or any kind of support.