LiitoKala Lii-100 Smart Multifunctional Battery Charger User Manual
- June 6, 2024
- LiitoKala
Table of Contents
LiitoKala Lii-100 Smart Multifunctional Battery Charger User Manual
This charger is designed for portable, flexible and multi types of battery. It can detect the battery type and charge the battery automatically under your selected charging current. Built-in LED indicators to display the charging status and 5V/100mAh USB output function.
Features
-
One-slot charging and management system, Micro USB DC 5V input port
-
500mAh/1000mAh charging current for selection
-
Built-in LED indicator shows the charging status 25% – 50% – 75% – 100%
-
Identify Li-ion and Ni-MH battery automatically
MUST fix the charging mode to Li-Fe when you charge LiFePO4 battery or 3.85V Li-Ion battery (Identify 1.2V Ni-MH/3.7V Li-ion battery automatically and select manually for 3.85V battery Li-ion and LiFePO4 battery) -
Refresh function for 0V battery
-
CAN’T charge battery type of 1.6-2.2V
-
Over-charging and over-discharge protection
-
Identify broken/defective battery
-
Polarity- reverse protection
-
Charging under constant voltage and current
-
Built with 5V/1000mAh output port
Operations
-
There’s a ‘SELECT’ button for choosing the charging mode and charging current
- Long press the ‘SELECT’ button for 3 seconds to change the charging current, you can change the charging current at any time
- Short press the ‘SELECT’ button to change the charging mode, it can identify the 1.2V/3.7V li-ion and Ni-MH automatically. You need to change the mode for 3.85V li-ion and LiFePO4 battery
- It begins to charge the battery 5 seconds after your settings.
-
Connect the 5V input port with USB cable, the LED indicator of 0.5A on when no battery is inserted. When broken battery inserted, the charge will have no any response.
-
LED indicators keeps flickering when a broken battery is inserted
-
It can show the battery type by click the ‘SELECT’ button at any time during charging
Specifications
IN:5V
- Input Power: Micro USB DC 5V/1A
- Output voltage: 4.2V ±1% / 5V
- Output current: 500mAh / 1000mAh
- Constant charging with cut-off current less then 100mAh
- Standby current: No more than 15mAh
OUT:5V
- USB output open-circuit voltage: 4.90-5.30V
- Output voltage: 1000mAh and output voltage is 4.75-5.25V
- Cut-off voltage for output: 3.0±0.1V
Compatible Batteries
- Li-ion / IMR: 18650, 18490, 18350, 17670, 17500, 16340(RCR123), 14500, 1044
Size(cm)/Weight(grams)
- Length 112mm x Width 37mm x Height 32mm
- 45 grams (charger) + 17grams (USB cable) included in delivery
Design and made in China
Contact distributor for more information or support
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>