DREXEL PROD POL236520 Turn Round White Orientable Installation Guide
- June 6, 2024
- DREXEL PROD
Table of Contents
DREXEL PROD POL236520 Turn Round White Orientable
WARNING:
The installation must be carried out by qualified persons in accordance
with the standards and regulations in force. It is recalled that the decision
to install the products in an environment compatible and in compliance with
the standards and good practices is the full responsibility of the buyer and
the installer. Read and follow the instructions before installing, powering on
or using the products. We do not accept any liability resulting from improper
implementation or installation of the products. The devices must not be
modified, even partially, otherwise the warranty will not apply. IMPORTANT:
Always turn off the power to the network before each installation or
maintenance operation.
TECHNICAL SPECIFICATIONS
For LED or halogen lamp, not provided
Electrical input characteristics: 12 VDC or 230 VAC, 50-60 Hz
Operating temperatures: -20°/+40°
Installations: on flush-mounted ceiling, delivered with pre-connected
holder and 3-pole quick-connect base unit
Materials: aluminium
INSTALLATION
- Cut a hole in the ceiling to the corresponding diameter (see information on the product pac-kaging)
- Fix the 3-pin quick hook onto the spotlight
- Connect the 230V electricity supply to the quick hook, then close the cover and make sure that the tension stop is performed correctly.
- Pull back the springs and install the spotlight in the ceiling.
- Install the lamp in the socket and ensure that the power cable is not in direct contact with the lamp.
WARNING:
The installation must be carried out by qualified persons in accordance with
the standards and regulations in force. It is recalled that the decision to
install the products in an environment compatible and in compliance with the
standards and good practices is the full responsibility of the buyer and the
installer. Read and follow the instructions before installing, powering on or
using the products. We do not accept any liability resulting from improper
implementation or installation of the products. The devices must not be
modified, even partially, otherwise the warranty will not apply. IMPORTANT:
Always turn off the power to the network before each installation or
maintenance operation.
-
TECHNICAL SPECIFICATIONS
IP20 (adjustable version)
IP44 (fixed version) with polycarbonate diffuser -
COMPATIBLE SPOTLIGHTS
R TIGHT DESIGN – R TIGHT DECO – DECO – DECO ASYM – DECO+ -DECO+ASYM -ALU 16 -ALU SOFT+ – BE BEST IP65 BBC – BE BEST DESIGN IP65 BBC – FLAT DESIGN -
INSTALLATION
