aplic 302145 Intelligent 4-Bay Battery Charger User Manual
- June 6, 2024
- aplic
Table of Contents
User Manual
INTELLIGENT 4-BAY BATTERY CHARGER
Mod.-Nr.: 302145
(UK) +49 511 / 13221 720
MON-FRI 9:30am – 18pm CET
https://downloads.ganzeinfach.de/
Thank you for choosing an aplic product. Please read the following user manual carefully to have an enjoyable experience with your purchased product. Before using the delivered product, check that they are complete, faultless, and undamaged.
Scope of supply
- 4-Bay battery charger
- Power adapter
- User manual
Technical data
Operating voltage| •Power supply: 100-240V, 50Hz
•Battery charger: 12V DC
---|---
Output| •4 charging bays
•1 USB port 5V DC / 1000mA
Battery types| NiCd, NiMH, Li-ion
Compatible battery types| •AA, MA, A, SC, C
•26650, 22650, 18650, 17670, 18490, 17500, 17335, 16340 (123A), 14500, 10440
Charging current per bay (adjustable)| 300mA| 500mA| 700mA| 1000mA
Discharging current per bay (half of the configured charging current)| 250mA|
250mA| 500mA| 500mA
Modes| •Charge
•Test / discharge
Features| •LCD display
•Backlight
•Test function (check battery capacity and internal resistance)
•Battery discharging function
•Internal resistance display
•Battery reverse polarity protection
Function
When the device is put into operation for the first time, check the intactness of the product or components and their function again. The aplic charger is intended for charging and testing microprocessor-controlled NiCD, NiMH, or Lithium-ion batteries. The four independent charging bays can accommodate and control batteries of different types, sizes, and capacities at the same time. The large, easy-to-read display shows information that can be optionally selected such as charging current, charged capacity, internal resistance or the current charging time per charging bay. Batteries are not subject to any capacity limits and can be charged using a charging current of 300mA, 500mA, 700mA, or 1000mA, whereby this can be selected independently for each bay. In addition, the charger also has a USB socket using which an external device having a maximum current consumption of 1000mA can be loaded or operated.
Product details
| 1 | Battery charging bays |
|---|---|
| 2 | Selection buttons |
| 3 | Display (1 for each charging bay) |
| 4 | Mode button |
| 5 | Display button |
| 6 | Current button |
Button functions
Selection buttons| With this button, you can select the desired charging bay
to configure the mode or the charging current.
---|---
“Mode” button| Using the “mode” button, you can select between the two modes
of “Charging” and “Test”. To configure all the charging bays at the same time,
press and hold the button for about 4 seconds till the display starts to
flash. You can configure the charging current using the “current” button.
If you want to individually configure the charging bays, then you need to
select the desired charging bay (1-4) beforehand using the selection button.
The “Display” button| By pressing the “Display” button, you can select the
information about current, voltage, capacity, internal resistance, and the
previous charging time, on the respective display.
“Current” button| The charging and discharging current can be configured using
this button. This button has only one function if you select one charging bay
using one of the selection buttons, or all the charging bays by pressing the
“Mode” button for 4 seconds.
Power supply
Use only the power adapter supplied or recommended by the manufacturer for this charger. All the LCD segments will be illuminated briefly as soon as the charger is switched on. A ‘null’ is displayed till all the batteries are inserted.
Initial use
Take the device out of the package and remove all the packaging material. Plug the supplied power adapter to a properly connected 230 v AC power socket and to the rechargeable battery charger. You can then insert the desired type of battery into the charger.
Please note! Charge only rechargeable batteries. Please do not use non- rechargeable batteries!
When a battery is inserted, the actual voltage is displayed for about 4
seconds. Then the actually configured charging current is displayed for 4
seconds. If you do not make changes using the “MODE” or the “Current” button,
the charging process starts automatically with the default charging current of
300mA.
The mode can be changed at any time subsequently by selecting the desired
charging bay using the selection buttons (1-4) and then pressing the “mode”
button. You can choose between “Charge” and “Test”. It may be that discharged
or defective batteries cannot be recharged. In such cases, the display shows
“null”.
If you want to charge completely discharged batteries, it may be that the
charging process is more effective if you load using a lower charging current.
The device can display the internal resistance of the battery (mR). The
internal resistance tells you something about the condition of the battery and
should be checked when fully charged. The higher the internal resistance, the
worse the condition of the battery. Please note that the contacts of the
charger, as well as those of the battery, also form a contact resistance,
which can falsify the measurement result negatively. To do this, clean the
contacts of the charger and the batteries with a cotton swab and some
isopropanol.
Charging current
Within the first 8 seconds of inserting the battery, you can press the
“Current” button to select between the various charging currents of 300mA,
500mA, 700mA or 1000mA. If you want to change the charging current or the mode
subsequently, you can select the desired charging bay using the selection
buttons “1-4”.
As soon as the display starts to flash, you can change the mode using the
“MODE” button, or configure the desired charging current using the “Current”
button.
Operating modes
“Charge” mode: The battery is charged to the maximum capacity. Start:
“Test” mode: This mode checks the actual capacity of a battery. The maximum
capacity is determined by discharging the battery after charging it fully. If
the maximum capacity is much lower than the rated capacity, then it may be
that the battery has reached the end of its life.
In such cases, it might sometimes be useful to run the test mode again so that
the battery reaches its full capacity again.
The testing process is completed:
Cleaning and Maintenance
Disconnect the device from the mains and make sure that it is not carrying any current. Wipe it using a dry and soft cloth. Please do not use aggressive cleaning agents.
Safety instructions and liability disclaimer
Never try to open the device to carry out repairs or conversions. Avoid contact with mains voltages. Do not short-circuit the product. The device is not certified for use in the open air; only use it in dry conditions. Protect it from high humidity, water, and snow. Keep it away from high temperatures. Do not subject the device to sudden changes in temperature or heavy vibration as this might damage electronic components. Examine the device for damage before using it. The unit should not be used if it has received an impact or has been damaged in any other way. Please observe national regulations and restrictions. Do not use the device for purposes other than those described in the instructions. This product is not a toy. Keep it out of the reach of children or mentally impaired persons. Any repair or alteration to the device not carried out by the original supplier will invalidate the warranty or guarantee. The product may only be used by persons who have read and understood these instructions. The device specifications may change without any separate prior notice to this effect.
Disposal instructions
Electrical and electronic devices may only be disposed of in accordance with the European WEEE Directive and not with household rubbish. Components must be disposed of or recycled separately as dangerous, toxic elements can inflict sustained damage on the environment if they are disposed of incorrectly. As a consumer, you are bound by the Electrical and Electronic Devices Act (ElektroG) to return electrical and electronic goods free of charge at the end of their useful life to the manufacturer, the place of purchase or to specially set up, public collection points. The details in each case are governed by national law. The symbol on the product, the operating instructions, and/or the packaging refers to these regulations. By separating materials in this way, recycling and disposing of old devices, you are making an important contribution towards protecting our environment.
WEEE guideline: 2012/19/EU
WEEE register number: DE 67896761
WD Plus GmbH, herewith declares that this product 302145conforms to the principle requirements and other relevant stipulations. The complete Declaration of Conformity can be obtained from WD Plus GmbH, Wohlenbergstraße 16, 30719 Hanover
WD Plus GmbH
Wohlenbergstraße 16 · 30179 Hannover
Germany
V1.1
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>