COWON PE-M10 True Wireless Earphones User Guide

**COWON PE-M10 True Wireless Earphones User Guide

**

Package content

• Wireless Charging Cradle

• Earphones

• Quick Guide

• Ear Tips

• USB Type C Cable
  

Actual content may vary from above image.

Wearing

• For charging, please remove the protective film from the earphone charging terminal

• Check the L and R marks on the earphone and put them in the correct ears

• Position them properly by twisting and rotating the eartips to fit in your ears.
  

Parts and Function

1. Touch Sensor IL)
   Call / Play/ Volume Down / Previous Track
   Touch Sensor (R)

2. Call/Play/ Volume Up / Next Track
   ANC On • OH

3. In-ear Detection Sensor

4. Charging Cradle Battery Level

5. Charging Port (USG Type{ Port)

6. Reset Button

Charging

Charging cradle

1. Insert the USB cable in the USB-C port and connect it to the power adapter to start charging.
2. The charging cradle battery indicates 4 levels of charging.

Please charge the cradle periodically

Wireless charging

You can charge PE-M10 simply by placing the cradle on the wireless charging pad with out connecting the cable to the cradle.

Please place the cradle on the wireless charging pad and check if the cradle LED is on.

Wireless charging  pad is not included.

Charging Earphones

1. Place the earphones in the cradle to start charging them automatically.

2. The LED indicates battery charge status. (Charging : The red LED Indicator on 2 your earphones turns on / Charging Completed : The LED Indicator on your earphones turns off)

Make sure that the earphone is properly in the fixing groove of the charging cradle and check if the earphone led IS ON.

Power On/Off

1. Opening the lid of the cradle turns on the earphones automatically

2. Closing the lid of the cradle turns off the earphones automatically.

Reset

Deleting pairing history

1. Place L/R earphones in the cradle and open the cradle lid.
2. Press the Reset button at the bottom for about 5 seconds.  The LED on cradle will flash 10 times and delete pairing history.

Pairing and Connection

1. Opening the cradle lid turns on the earphones 1 automatically, ready to proceed to pairing.
2. Turn on Bluetooth on your smartphone or Bluetooth-capable device.
3. Select ‘PE-M10’ from the list of detected 3 devices to pair and connect automatically.

• The PE-M10 supports: Dual mode (Stereo) to use the left and right earphones together and Single mode (Mono) to use them separately.
• By using the PE-M10 in Single Mode, you can alternate between charging the left and right earphones for extended use. (Audio books, Podcasts, etc.)
• Since Single Mode uses only one earphone, you can stay aware of environmental sounds and use the device more safely when walking or riding bicycles.
• Remove both the left and right earphones from the charging cradle for use in Dual Mode, or only remove one earphone for use in Single mode.
• Placing one earphone in the charging cradle while in Dual mode does not disconnect the other earphone in use.
• After the initial pairing, opening the cradle lid automatically connects the earphones to the most recently connected device.
• Keep the product and a mobile phone within 1 meter when pairing. If passkey input is required, enter a password or a PIN No: 0000

Listening to Music- Making a Call and Volume Control

1. Use the Volume Down function with the L earphone and Volume Up function with the R earphone. (In Single mode, only the functions on the earphone currently in use are available.)
2. In Dual mode, the microphone of the earphone removed from the cradle first will be enabled. In Single Mode, each earphone will output sound with both microphones enabled for use.
3. Use the L earphone to go to the previous track and the R earphone to go to the next track. (In Single mode, only the functions on the earphone currently in use are available.)
4. Touch the sensor for 2 seconds to launch the voice recognition feature on your smartphone or tablet.
5. Touch the sensor for 2 seconds to activate the ANC (Active Noise Canceling) function.
6. When you touch the sensor for 2 seconds again while ANC is on, Transparency Mode will be activated.
7. Touch the sensor for 2 seconds in Transparency Mode to deactivate the ANC function.

Warranty Policy

COWON REPAIR CENTERS

Korea Service Center

Japan Service Center

USA, Canada Service Center

WorldWide Service Center

| Seoul, Korea

Tokyo, Japan

Irvine, USA

Seoul, Korea

| www.cowon.com

www.cowon.co.jp

www.jetaudio.com

www.cowonglobal.com / www.cowon.com

[Important Notes]

Please retain the original dated sales receipt. Proof of the date of purchase will be required with any request for warranty service. In order to expedite the repair process, COWON recommends you to complete the form below at the time of purchase and present it to our repair center with the receipt.

Model Name
Dealer’s Tel No.
Serial No.
Dealer’s Name, Sign or Stamp
Country of Purchase
Date of Purchase

The terms and conditions of this Warranty(hereafter referred to as ‘Warranty”) are only valid in the countries that the COWON product (hereafter referred as “Product”) was originally purchased. As warranty service is only available from within the country where the products were originally purchased, you may be required to ship products, at your expense, to the authorized service center in the country where the products were purchased. COWON will repair or replace products if they fail to function properly during the warranty period, subject to any conditions and/or limitations stated herein.

Warranty

Warranty Coverage

COWON warrants products and accessories against defects for a period of one year and three months respectively from the date of original purchase of COWON product (hereafter referred as “Product”). As warranty service is only available from within the country where the products were originally purchased, you may be required to ship products, at your expense, to the authorized service center in the country where the products were purchased. COWON will repair or replace products if they fail to function properly during the warranty period, subject to any conditions and/or limitations stated herein.

COWON warrants products and accessories against defects for a period of one year and three months respectively from the date of original purchase. If a defect arises and a valid claim is received by COWON within the Warranty Period, at its option, COWON will repair or replace the product without charge, using new or refurbished replacement parts. But the shipping expense may be required to be paid according to the region and the warranty service may take longer if service parts are not available.

Exclusions and Limitations

This warranty does not apply when failure is due to shipping damage, accident, alteration, modification, unauthorized service, misuse, abuse, use with incompatible accessories or attachments (such as third party’s service parts or accessories), failure to follow COWON’s operation, maintenance or repacking instructions, failure to use items supplied by COWON (such as adapters and cables), or claims made after the duration of this warranty, and failure with the serial number which is altered, defaced or removed, and natural calamity, force majeure, unforeseeable accidents and any other external factors beyond the control of COWON.  COWON makes no other warranties, express, implied, or of merchantability or fitness for a particular purpose for products.

Note : Before you deliver your product for warranty service, it is your responsibility to back up all data, including all software programs. COWON is not responsible for data that may be lost or damaged during transit or a repair.

EU-Declaration of Conformity

EU-Declaration of Conformity can be found at www.cowonglobal.com/eu_doc Using the earphones in places with high static electricity may cause malfunctions. This device contains magnets. Be sure to consult a physician before use if you have any transplanted medical devices.

Precautions

• For safety, please read the enclosed instruction manual.
• Wearing the earphones for an extended period of time may harm your health.
• Maintaining high volume levels may result in serious hearing damage.
• Using the earphones in places with high occurrences of static electricity may cause malfunctions.
• This device contains magnets. Be sure to consult a physician before use if you have any transplanted medical devices.

FCC Regulations

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This device has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/ TV technician for help.

Changes or modifications not expressly approved by the manufacturer could void the users authority to operate the equipment.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>