Kinship Partners W05A Whistle Switch User Guide

June 6, 2024
Kinship Partners

Kinship Partners W05A Whistle Switch

WHAT’S INCLUDEDin the box

LET’S GET STARTED
Be sure to set up your Whistle Switch'” Smart Collar from the home you share with your lucky pet. You’ll need a Wi-Fi connection.

  1. CHARGE BATTERY
    Use included cable E) to fully charge one battery O. Use second battery to continue setup.Kinship Partners W05A Whistle Switch fig
1

  2. DOWNLOAD WHISTLE PET TRACKER APP
    Follow app prompts to create your Whistle account, set preferences & more.

    • Make sure your phone’s Bluetooth® setting is on, and stay within 5-15ft of your router throughout setup.Kinship Partners W05A Whistle Switch fig 3
  3. COMPLETE SETUP

ACTIVATE YOUR WHISTLE PLAN
Your Whistle Plan covers location updates powered by AT&T cellular network, health + fitness monitoring, and custom insights about your pet.

HANG TIGHT!
Activation may take up to 2 hours. You’ll get an in-a pp notification once the smart collar is ready for your pet. Make sure your Whistle Switch collar is in an area where you have good cellular reception, e.g. near a window.

REMEMBER TO SWAP OUT YOUR BATTERY
Whistle Switch batteries ship partially charged so you can complete setup right out of the box. When one battery is fully charged, swap it out, and fully charge the other.

HOW TO SWAP A SWITCH BATTERY

A push notification will be sent to your phone when your battery drops to 25% as a reminder to swap your battery.

ATTACH
Align dot on battery A to dot on tracker B, then firmly press together until it snap-locks into place.

DETACH
To remove battery A, press tabs on short sides, then pull up.Kinship
Partners W05A Whistle Switch fig 4

ALREADY A WHISTLE CUSTOMER?

TO ADD A NEW WHISTLE DEVICE
Tap Human icon > Add Whistle Device> Whistle Switch > New Pet Setup, then follow on-screen prompts.

TO REPLACE A WHISTLE DEVICE
Tap Human icon > Add Whistle Device> Whistle Switch, then select pet’s name to replace device. See how to swap a Whistle Switch battery on page 3.

WIPE DOWN AFTER WATER

Once battery is snap-locked onto collar, Whistle Switch is IPX8 certified at 2m water submersion for 30 minutes. If it takes a swim with your pup.just wipe the device dry before recharging.

NEED HELP?
If you have a question, we’re here to help.
ONLINE : whistle.com/pages/support
PHONE:855-999-0471

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals