ROSS Touch Drive Panel User Guide
- June 6, 2024
- ROSS
Table of Contents
ROSS Touch Drive Panel User Guide
Panel Ports and Connectors
NOTICE Only connect certified
Ross equipment with Ross provided cables to the Monitor Power port.
Notes:
- There is an additional USB 3.0 port on the side of the backsplash on some panels. The ports on the back of the panel are all USB 2.0.
- The ports on the TD1C are in a different position, but have the same function.
Specifications
Input Voltages
All: 100 – 120V~, 220 – 240V~, 47-63Hz
Power Consumption
| TD1C | 50W | 3.33A | 15V |
|---|---|---|---|
| TD1 | 73W | 4.87A | 15V |
| TD2 | 85W | 5.67A | 15V |
| TD2S | 107W | 7.13A | 15V |
| TD3S | 165W | 11A | 15V |
Desk Mounting
Note: The Desk Mounting option is required to properly secure the panel to a desk.
Note: You may have to remove the legs from the control panel to mount it in a desk.
Monitor Ports and Connectors
Cabling
CAUTION! Only use the cable provided to connect power to your Touchscreen display from the 12V Monitor port.
NOTICE The Touchscreen must be
connected to the control panel before you power up the control panel.
Note: It is recommended that you always connect the AC Power Adapter to the device before connecting to Mains Power.
Having a problem? Call our free, 24-hour technical support hotline to speak with a live product specialist located right here in our facility.
Tel: (+1) 613 • 652 • 4886
Email: techsupport@rossvideo.com
© 2021 Ross Video Limited. Ross®, MiniME™, TouchDrive™ and any related marks are trademarks or registered trademarks of Ross Video Limited. All other trademarks are the property of their respective companies. PATENTS ISSUED and PENDING. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, mechanical, photocopying, recording or otherwise, without the prior written permission of Ross Video. While every precaution has been taken in the preparation of this document, Ross Video assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained herein.
