Sanmak 4010-001 Remote Control Instructions
- June 6, 2024
- Sanmak
Table of Contents
Sanmak 4010-001 Remote Control
Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- this device must accept any interference received, including interference that may cause undesired operation.Changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Technical data
- Model： 4010-001
- Work voltage: 12Vdc
- Work currency ：≤12mA
- Distance： 50-100M（wide space） Frequency：433.92MHZ
- Frequency toleance: ±0.2MHZ
- Material: plastic
- M odulation: ASK (Amplitude Modulation)
- Size: 1207231mm
- Net weight: 110 grams
- Work voltage: 10-30Vdc
- Work currency： ≤20A
- Distance： 10-25M（wide space） Frequency：2402-2480MHz
- Material: plastic
- Modulation: GFSK(Gauss frequency Shift Keying) Size: 224120.244.5mm
- Net weight: 930 grams
Application fields
Vehicle and ship lighting lamps, vehicle and ship warning lamps, vehicle and
ship horn and other lamps and other automotive electronics and consumer
electronics and electrical control.
This device plies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void your authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.