UOLOPG03045 Pulse GloWave Bluetooth and FM Speaker User Manual

Bluetooth & FM Speaker
User Manual

Technical Specifications:

• Bluetooth 5.0
• Tramission distrance : 10 meters radius
• Play time : 24+ (at 60% volume with LED lights off)
• Frequency : 100Hz ∼10KHz
• Speaker : 57mm*2, 4Ω 8W
• Input Power: 5V 0.5A
• Maximum current consumption: 1A
• Battery capacity: 2600 mAh

Features:

1. Bluetooth
2. TWS (link 2 speakers together)
3. Support USB / SD card / AUX input
4. FM radio
5. Built-in rechargeable lithium battery
6. Built-in Mic
7. Support MP3/WAV/WMA/FLAC/APE music file format
8. IPX7 rated
9. LED party lights

Button Function:

1. Volume +:

• Short press to increase the volume
• Long press to the next song
• In FM mode, long press to the next channel

2. Volume – :

• Short press to reduce the volume
• Long press to the previous song
• In FM mode, long press to the previous channel

3. LED button :

• Press to turn on the LED color changing light
• Long press to turn off the LED color changing light
• Double press to exit wireless connection

4. Power button :

• Short press: play/pause
• Long press for about 3 seconds to power on/off
• In FM mode, double press to scan FM channels

5. Multi-function button :

• Short press to enter/exit pairing mode
• long press to switch between BT and FM
• In BT Mode:
  • Double press to activated call back function
  • Short press to answer/hang up the phone call
  • Long press 2 seconds to reject phone call

6. Auxiliary input

7. USB input

8. USB C charging port (input 5V) :

• Use a charging cable to charge the speaker
• In FM Mode, the charging cable must be connected as an antenna

9. SD card slot :

• Inserted SD card with music to play

10. LED charging indicator

Charging & Usage:

• Solo Pulse GloWave speaker is equipped with overcharge circuit protection.
• Takes 6-7 hours to fully charge the speaker. LED charging indicator will turn off once fully charged.
• Playtime may vary depending on music type, play volume, and LED light usage
• Use up to a 5V 1A charging adapter to recharge the speaker.

How to use:

1. Power on the Solo Pulse GloWave speaker to pair with your Bluetooth-compatible device. To pair with Bluetooth device :
   a. Go to your device Bluetooth settings
   b.Turn on Bluetooth
   c. Search for”Solo Pulse GloWave”
   d. If the Solo Pulse GloWave is not listed, press the Multi-Function Button on the speaker to switch the speaker into the pairing mode
   e. Select and connect to Solo Pulse GloWave

2. Bluetooth LED indicator:
   a. Pairing/discovery mode —White LED light fast flashing (by the charging port)
   b. Successful connected —White LED light staying on solid

3. The speaker will be in wireless mode by default when starting-up

4. Must plugin the USBC charging cable as an antenna when playing in the FM mode
   Note: To use the FM mode for the 1st time, please perform a full FM channel scan. When the full scan is completed, press/short hold + or – buttons to navigate through different stations.

5. TWS linking function (pair 2 Solo Pulse GloWave together):
   a. Long press Multi-Function Buttons on both speakers to enter into pairing mode
   b. Solo Pulse GloWave will appear twice on your device’s Bluetooth pairing list. Do not select either one just yet
   c.The 2 speakers will pair with each other first. Once paired, only one Solo Pulse GloWave will remain on your device Bluetooth list
   d. Select and connect to Solo Pulse GloWave, and you are in TWS mode

6. The default volume of the speaker is 70% when power on

7. The speaker automatically powers off after idle for 15 minutes

Troubleshooting:

Save music file under the root directory of the removable drive

No Sound| Speaker volume low or device muted| Adjust Volume on the speaker and your device
No Sound| Connection error|

Hard reset the speaker by pressing and holding the “power” button at the back of the speaker for 8 seconds. Forget the speaker on your device and then re- pair the speaker to your device

Limited Lifetime Warranty

*This warranty does not cover normal aging of the battery due to usage

For more info visit us at:  www.uoloonline.com

FCC Warning

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>