Dongguan Yiyang Plastic Mould Products HS-XO305 Wireless Controller Instructions
- June 6, 2024
- Dongguan Yiyang Plastic Mould Products
Table of Contents
Dongguan Yiyang Plastic Mould Products HS-XO305 Wireless Controller
Instructions Manual
ButtonLayout
View Button
Product Brief
This product is the Xbox One wireless 2.4G controller. It is used to play
games on XBOX one console through RF 2.4G wireless controller.
It is compatible with PS3 and can be used on a PC(X-input/D-input) console.
Operation Guide
Connection Description
Start the Xbox one console and insert the USB of the receiver to the console.
The LED light on the receiver will be on. Short press the HOME Button on the
controller to open the controller. Then LED1-LED4 lights will flash to search
for pairing. After they are well connected, LED1-LED4 lights of the controller
will be on and the light of the receiver will be on, indicating that they can
be used.
Start PS3 console and insert USB of the receiver to the console. The LED light
on the receiver will be on. Short press the HOME Button on the controller to
open the controller.
Then LED1-LED4 lights will flash to search for pairing. After they are well
connected, related indicator lights of the controller will be on and the light
of the receiver will be on, indicating that they can be used.
Start PC and insert the USB of the receiver to the console. The LED light on the receiver will be on. Short press the HOME Button on the controller to open the controller. Then LED1- LED4 lights will flash to search for pairing. After they are well connected, related indicator lights of the controller will be on and the light of the receiver will be on, indicating that they can be used. Long press the HOME Button for five seconds to switch the X-input mode and the D-in put mode. In the X-input mode, LED1 light will be on; in the D-input mode, LED1-LED4 lights will be on.
Auto Sleep
After it is well connected, the controller will sleep automatically if the
operation is done within 5 minutes. After the controller sleeps, you can press
the Home Button to power it up and connect it with the receiver plugged on
the host computer.
After it is well connected, you can close the controller by pressing the
L3+R3+HOME Button for three seconds.
Low Voltage Alarm
If the lithium battery voltage is lower than 3.5V±0.1V, the current channel
will flash quickly to show low voltage;
If the lithium battery voltage is lower than 3.45V±0.1V, the controller will
enter the dormant state automatically;
Charging Indicator
Under the shutdown state of the controller, LED1-LED4 will flash slowly when
the controller is charged. After it is fully charged, the LED will be off; If
the controller is charged under the connection state, the indicator light of
the current channel will flash (flash slowly). After it is fully charged, the
indicator light will be on;
Reset
When the Controller is abnormal, you can press the small hole on the back of
the controller with a small office clip to reset it.
Parameters
Input DC Voltage for Charging: 5V/1A
Built-in Battery Capacity: 600mA
Dormancy Current: Less than 50uA
Input Current: 25mA-150mA
Precaution
- Do not disassemble the product without permission.
- Do not expose the product to strong light.
- Do not throw the product violently.
- Do not use or store this product in a high temperature or humidity environment.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly
approved by the manufacturer could void your authority to operate this
equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions operation.
RF Exposure Information
The device has been evaluated to meet general RF exposure requirements. The
device can be used in portable exposure conditions without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>