Jolly Comb MS040 2.4G+BT1+BT2 Rechargeable Wireless Mouse User Manual
- June 6, 2024
- Jolly Comb
Table of Contents
Jolly Comb MS040 2.4G+BT1+BT2 Rechargeable Wireless Mouse
Product Features
- A: Left Button
- B: Right Button
- C: Scroll Wheel
- D: DPI Button
- E: Mode Switch Button
- F: USB Indicator
- G : BT1 Indicator
- H: BT2 Indicator
- I: Charging Indicator
- J: TYPE-C Charging Port
- K: Power Switch
- L: USB Slot
- M: USB Receiver
- N: Forward
- O: Back
2.4G USB CONNECTION
- Push Power Switch to ON.
- Take out the USB receiver.
- Press mode switch button to 2.4G mode until while light turns on.
- Plug the receiver into computer.
BLUETOOTH CONNECTION
-
Push Power Switch to ON.
-
Press mode switch button to BT1 or BT2 mode until white light flickers slowly.
-
Long press mode switch button for 3-5 seconds until whita light fiickers quickly and the mouse is pairing.
Window 10 System -
Click “Bluetooth Device” on computer
-
Click “Add or delete Bluetooth device”.
-
Search “BT 4.0+2.4G Mouse” and click to pairing.
-
“BT 4.0+2.4G Mouse” Connected,the mouse is ready to go.
Mac OS system
Follow steps 1 to 3 before pairing.
- Click “System Preferences” on Mac.
- Click “Bluetooth”.
- Search “BT 4.0+2.4G Mouse” end click to pairing the mouse will work after the driver is installed.
iOS System
Only supports 108 13 systems and above. Follow steps 1 to 3 before pairing.
- (Click ” Accessibility” and “Touch”.
- Click “Assistive Touch” and Open it.
- Switch it on the “AssisUveTouch”.
- Open Bluetooth.
- Search “BT 4.0+2.4G Mouse” and dick to pair.
- “BT 4.0+2.4G Mouse” Conneated,the mouse Is ready to go.
Android System
Follow steps 1 to 3 before pairing.
- Click”Settings” and open Bluetooth.
- Search “BT 4.0+2.4G Mouse” and click to pair
- “BT 4.0+2.4G Mouse” Connected,the mouse is ready to go.
HOW TO CHARGE
When the mouse is under low power, the channel indicator will flickers until shutdown. Please charge the mouse to power supply via USB cable.
Connect the USB cable to computer usb interface, the BT 2 lndlcator turns blue for 1-3.5 hours for charging. The blue indicator tums off after fully charged.
HOW TO SWITCH MODE
BT 1 BT2 and USB Receiver connected, short press mode switch button on the top, lhe mouse will switch eesil)’ between multi-devices.
Short press mode switch button on the top to switch between 3 devices.
Specifications
Basic specifications:
- Chip; Nordic I\IRF51802W
- Sensor: Optical
- Li-ion Battery: 300mA
- Mouse DPI: 1000-1600-2400DPI
- Keystrokes; Over 3,000,000
- Dimension: 4.81•3_27•1.93inch
- Weight 0.251b
2.4G Transmission:
- Working distance: 20m
- Working Voltage: 3.7V
- Working Current: 5.5mA
System Requirement:
- Available USB Port
- Windows XP, Window 7, Windows 8, Windows 10, and aboVe
- Mac os X 10.10 or above
Bluetooth Transmission:
- Working distance: 10m
- Working Voltage; 3. Tl/
- Working Current 4mA
System Requirement
- Bluetooth-enable device Windows 8, Windows 10 or higher version
- Mao as x 10.1 o or higher version
- Android 4.3 or higher version
Package Included
- 1 “Wireless Mouse
- 1 user..A Receiver
- 1″TYPE-C Charging Cable
- 1User Manual