BENTSAI B10 Mini Handheld Printer Instructions

BENTSAI B10 Mini Handheld Printer

On/off function

Press and hold the power/print button on the side of the product for 3 seconds, the indicator light turns on and enters the startup state (the indicator light changes from white to green, and the printer is ready).

1. Power/Print button
2. Status Indicator
3. Reset hole(Forced shutdown by fine needle insertion)
4. IFI indicator
5. Ink cartridge cover 5 open button
6. Charging port

Charging function

This product uses the type-c interface to charge, and the input voltage is 5V- 1A. The indicator light is red when it isturned off and charged, and it goes out when it is full.

Install and remove ink cartridges

1. Press the ink cartridge cover open button to open the ink cartridge cover (the indicator light turns red).

2. Insert the ink cartridge into the ink cartridge compartment diagonally from above. (The direction of the ink cartridge nozzle is shown in the figure)

3. Align the ink cartridge with the inkjet opening and insert it until it completely enters the ink cartridge compartment.

4. Close the ink cartridge cover, and the indicator light turns green again.

Printing steps

1. Turn on the mobile phone WIFI and select PRTFOX-XXXXX (product serial number), enter the password to connect to the product.
2. Scan the QR code (P1) in the manual to download the APP.
3. Open the APP, enter the content, and click the print button.
4. Open the nozzle protective cover at the bottom and press the side print (power on) button.
5. Place the printer nozzle on the printing surface and slide the printer at a constant speed.

Printer maintenance

1. If the printer does not print within 10 minutes,cover the nozzle protective cover.

2. When not in use for more than 10 minutes, take out the ink cartridge from the printer and put the protective clip on it.

3. If fine white lines appear during printing, please wipe the nozzle with a paper towel or soft cloth sprayed with 95% alcohol.

Precautions

• Please keep the product and ink cartridges away from children.
• Do not wipe the inside of the product when using a moist cloth to wipe the device.
• When the ink gets into your eyes accidentally, please wash with plenty of water immediately. If you have any symptoms, please go to the hospital for help immediately.

Status indicator

Data receiving is complete, waiting for

printing, printing

| blue light on
Printer error (the upper cover of the ink

cartridge is opened)

| red light on
Warning (the print head cover is opened and

the battery is low)

| Red light flashes (0.5 seconds on and

0.5 seconds off)

printer dormant| Green light flashes (1 second on

and 3 seconds off)

The firmware is being upgraded| yellow light on
Firmware upgrade failed| red light on
Charging instructions| red light on (Only when turned off

and charging)

WIFI indicator| power on| white light on
The phone is not connected or the router is not connected| blue light on
The phone is connected or the router is connected| green light on
dormant or firmware upgrade| No display
Initialization or operation error| red light on

Packing list

The warranty provisions

Dear customers
Thank you for purchasing the products of Zhuhai Bentsai PrintingTechnology Co.,Ltd. In order to guarantee the use safety of the product and your legitimate interests , please read the following carefully. This product is a precision grade instrument. In case of any abnormality and the device failure, please check it according to the instructions in the manual or contact our customer service center. Do not handle it by yourself.

Terms of service

1. This product implements the national three-guarantee regulations for products, and implements a one-year warranty period. The start date of the warranty period is subject to the product invoice date.
2. During the warranty period,if the product is innormal use and maintenance for failure caused by machine parts and materials andprocess, the company will provide free repair and replacement parts.
3. Except for wearing parts(ink cartridges , power line are not covered by the warranty).

Disclaimer
Any of the following conditions is not covered by the warranty:

1. Damage caused by improper transportation, use, storage and maintenance
2. It is not repaired by the maintenance department designated by the company,or assembled disassembled and repaired by user.
3. Parts or consumables used are not from the factory of the company and cause damage.
4. No warranty card and valid certificate or they are altered
5. Beyond warranty period.
6. Damage caused by force majeure.

FCC Warning Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

References

• 喷码机_手持式喷码机_喷码机品牌_订制打印机_珠海奔彩打印科技有限公司

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>