Hangzhou Hongshi Electrical W-BG001 Wireless Smart Gateway Instruction Manual
- June 6, 2024
- Hangzhou Hongshi Electrical
Table of Contents
Hangzhou Hongshi Electrical W-BG001 Wireless Smart Gateway
Indicator status
Product Specification
Packing List
- Wireless Smart Gateway x1
- Data Cable x1
- Product Manual x1
Product Introduction
Intelligent gateway is the control center of Bluetooth equipment,Users can add devices and reset ,third-party control and Bluetooth group control to meet the requirements of smart home and other applications etc.
Preparation for Use
- Connect the device to the power supply and make sure that the phone is connected to a 2.4GHz Wi-Fi network, turn on bluetooth
- Search for “Smart life” in the App store or scan the QR code on the outer package or in the manual to download and install the App.
- After logging in, follow the instructions to create a family
Network Access Setting
- Confirm that the network configuration light (red light) blinks (if the network configuration light is in another state, press the reset button for 5 or 6 seconds and wait for the red light blinks); Follow the App instructions to add device
- Open “My family” page in “Smart life” App, click “+” button in the top right corner;
- Select “Wireless gateway (Bluetooth)” under “Add Manually”
When added, the device can be found on the “My family” list.
FCC Warning
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. Radiation Exposure Statement
To comply with FCC RF exposure compliance requirements, this grant is applicable to only mobile configurations. The antennas used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>