Airoh TWIST 2.0 Color Motocross Helmet Instructions
- June 6, 2024
- Airoh
Table of Contents
Airoh TWIST 2.0 Color Motocross Helmet Instructions
Retention system
Warning!! The D-D Rings retention system works effectively only if the
strap has been properly introduced into the retention rings, see Fig.1.
Warning!! Never remove the strap end from the rings. Warning!! If, while
cleaning or performing maintenance, the strap slips off the rings, properly
fasten the strap again as shown in Fig.1. Once the strap has been
introduced into the rings, put the helmet on and fasten it as per specific
instructions, then perform retention and take-off procedures. Warning!!
The red fastener on the strap end is solely used to prevent the free strap end
from fluttering Fig.2; it is not part of the retention system. Moreover,
the system is equipped with a red strap for quick release. Just pull as
indicated in Fig.3 to activate it. Warning!! Use the red strap only to
remove the helmet; never use it while riding.
VENTILATION SYSTEM
Locatelli S.p.A. accepts no responsibility for damages resulting from accidental fails that could provoke dents and/or abrasions.
Adjustable and Removable peak Regulation
Inner Lining
ASN System
The first thing to do to avoid danger is not to get involved in the first
place. Easier said than done, but not in this case. Because Airoh has
introduced the ASN System, a 3-D fabric structure designed to reduce the force
transferred to the head on impact. The ASN System’s 2 outer walls move
relatively to each other, dissipating the energy generated by the impact more
effectively. It also offers incredible ventilation, a crucial factor in more
extreme riding conditions.
Accessories
LIVE THE # RIDEON
TWIST 2.0
**Let’s Twist again
**
Locatelli S.p.A.
Via Resistenza 5/A Almenno S. Bartolomeo 24030 BG – Italy
VAT: IT 02582780165
SDI: A4707H7
Tel.+39 035 55 31 01
www.airoh.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>