alphatronics K-19SB+ 12/230 Volt LED TV User Manual

User manual
Modell K-19SB+ | K-22SB+ | K-24SB+

KUNDENDIENST
Sie haben dieses Gerät mit einer dreijährigen Gewährleistung erworben. Sollten Fehler oder Probleme auftreten, wenden Sie sich bitte an den Verkäufer.
Anmerkung
Bei Designs, Funktionen und Ausstattung sind Änderungen vorbehalten.
Die verwendeten Beispielbilder sind nur zu Anschauungszwecken geeignet und können vom Original abweichen.

Hiermit erklärt die
alphatronics GmbH, Breitengraserstraße 6, 90482 Nürnberg, Deutschland,
dass sich die Geräte
K-19SB+ (386272) | K-22SB+ (386273) | K-24 SB+ (386274)
in Übereinstimmung mit den grundlegenden Anforderungen und den übrigen einschlägigen
Bestimmungen der Richtlinie 2014/53/EU befinden.
Die vollständige Konformitätserklärung finden Sie unter:
www.alphatronics.de/de/support/konformitaetserklaerungen,14/

Weitere Angaben für TV-Geräte mit der Ausstattung Bluetooth:
Bluetooth 4.2
Range: 2402 – 2480 Mhz
Power: 1mW
USB Playback port: DC 5 V 500 mA
Weitere Informationen zu unseren Produkten finden Sie in der EPREL Produktdatenbank.
Die jeweilige Registrierungsnummer (6-stellig) steht in Klammern hinter der jeweiligen Gerätebezeichnung.

INTRODUCTION AND SAFETY INSTRUCTIONS

Thank you for purchasing our alphatronics LED TV. This is a short version of our user manual. If you would like more information or need more detailed instructions, please visit our website: www.alphatronics.de

Safety
For your own safety and to prevent unnecessary damage from your device, please read and observe the following safety instructions:
Appropriate use and environmental conditions:
This TV is intended exclusively for the reception and reproduction of image and sound images. It must not be operated in rooms with high humidity (e.B. bath or sauna). The warranty is only granted for use in the said permitted environment. When used outdoors, make sure it is protected from moisture (rain, drip, and splashing water). High humidity leads to creep currents in the device. This can lead to a danger of contact with voltages or a fire.
If you have brought the device out of the cold into a warm environment, leave it off for about an hour due to the possible formation of condensation moisture.
Do not place liquid-filled objects or burning candles on the device.
Depending on the selected mounting or stand solution, there is a risk of crushing between the TV housing and the stand. When rotating the TV, make sure that there are no fingers or objects in this area.
Batteries pose a potential choking hazard. Do not allow children to open the battery storage compartment.
Transport:
Touch the device at the bottom and top of the chassis edges.
The display is made of glass or plastic and can break if treated improperly. In the case of damages caused by external influence, no guarantee is granted.

Power supply:
Incorrect voltages can damage the device. This device may only be connected to a power supply network with the voltage indicated on the type plate by means of a correct 12V device connection cable or attached power cable. The power plug of the TV must be easily accessible so that the device can be disconnected from the mains at any time. If you unplug the power plug, do not pull it on the cable, but on the plug. The cables in the power plug could be damaged and cause a short circuit when plugged in.
Route the power cord so that it cannot be damaged. The power cord must not be bent, laid over sharp edges, not committed, and not exposed to chemicals – the latter applies to the entire device! A power cord with damaged insulation can cause electric shocks and poses a fire hazard.

Air circulation and high temperatures:
The ventilation slots on the rear of the device must always remain free. Please do not put newspapers or doily on/over the TV. On the side and above, at least 2 cm of free space for air circulation must be ensured when the device is placed in a cupboard or shelf or hung. Like any electronic device, your TV needs air to cool in operation. If the air circulation is impeded, fires can occur.
Place the TV with stand only on a flat, stable, horizontal underlay. The device should not protrude, especially when located in or on furniture at the front.
Set the device so that it is not exposed to direct sunlight or any additional heating by radiators.
Avoid that metal parts, needles, paper clips, liquids, wax, or the like get into the interior of the device through the ventilation slots of the rear wall. This leads to short-term in the device and thus possibly to a fire.
Should something ever get inside the device, immediately pull the power plug of the device and inform the customer service for inspection.
Repairs and accessories:
Do not remove the rear panel of the TV set yourself. Leave repair and service work exclusively to authorized television technicians.
Note according to (EU) 2019/2021:
As soon as you select a configuration on your television or make settings that can increase the energy consumption compared to the „standardstate“, you will be informed of this by a corresponding message. You can only continue with the setting or only save it if you confirm the message accordingly.

Clean:
Only clean the TV set, the display, and the remote control with a damp, soft, and clean cloth without any sharp or abrasive cleaning agents.
Note on the LED display:
The TV set with LED display that you have purchased meets the highest quality requirements and has been checked for pixel errors. Despite the utmost care in the manufacture of the displays, for technological reasons, it cannot be 100% ruled out that pixels may have defects.
Recycling:
The EU Directive 2012/19 / EU regulates the proper return, treatment, and recycling of used electronic devices. Old electronic devices must therefore be disposed of
separately. Please do not dispose of this device with normal household waste!
You can get your device free of charge at designated collection points or, if necessary, at your
Hand in a specialist dealer if you buy a comparable new device.
According to the Battery Ordinance, used batteries may no longer be disposed of with household waste be disposed of. Throw used batteries free of charge in the shops set up
collecting container.
You can find out more about recycling (also for countries outside the EU) from your local government.

SCOPE OF DELIVERY

1. LED TV device
2. DC adapter and power cord
3. remote control
4. Connection cable
5. operation manual

KEY FUNCTIONS

• Open or exit a menu

2| CH+/-|

• Selection of TV channels, press this button to select the channels or to select the upper or lower menu in the OSD menu

3| VOL+/-|

• Increase or decrease the volume
• Customize the selected menu items in the OSD menu

4| Input source|

• Selection of input signal: antenna, cable, satellite, media, AV,
• PC, YpbPr, and HDMI

5|

|

• Power-on button in standby mode

The on/off switch is located on the right backside of the device.

POSITION AND FUNCTION OF KEYS

K-19SB+ | K-22SB+ | K-24 SB+

Note:
When the device is in operation, the LED indicator is not lit. When the device is in standby mode, the LED indicator lights up blue.
Note: If the TV does not receive a VGA/HDMI signal after 1 minute, or if it does not receive a video signal after 10 minutes, the TV automatically switches to standby. The standby LED then lights up blue again.

Lower view K-19SB+ | K-22SB+ | K-24 SB+

1. Input: Input DC 2 HDMI 1
2. HDMI 1
3. HDMI 2
4. AV in
5. Audio out
6. Headphones
7. DVB-S/S2 In (SAT antenna)
8. DVB-C/T2 In (cable connection/DVB-T antenna)

Side view K-19SB+ | K-22SB+ | K-24 SB+

1. Coaxial out
2. Mini YPbPr-In
3. CI+ Slot
4. USB 1/ USB 2 Port

Inserting the batteries

Replace the batteries as shown in the picture: 2 Batteries of type „AAA“ are required
Attention:

1. Store batteries child-proof.
2. Never try to charge alkaline batteries, do not close them briefly, and do not throw them into the fire.
3. Always replace both batteries at the same time. Do not mix old and new batteries or batteries of different designs.
4. If the remote control is not used for a long time, please remove the batteries to avoid leakage of acid.

Notes:

1. Do not drop the remote control or kick it.
2. Protect the remote control from water and moisture.
3. Do not use the remote control for other devices at the same time.
4. If the TV does not respond to the signals of the remote control, please change the batteries first!

REMOTE CONTROL

COMMISSIONING
Commissioning
Before commissioning, please connect your TV to a suitable power connection. For your convenience, we have already added a station list for the DVB-S2 reception. This means that you do not need to perform a channel search. For the DVB-T/C reception, we recommend that you perform an automatic channel search depending on the location. For this, please go to the main menu „Sender Search“ and select the item „Automatic Sender Search“ there, select DVB-T or DVB-C, and follow the instructions.
Choosing a TV channel
Either you use the CH+/ key and the arrow key to switch a channel up or down, or the 0-9 button to call a channel directly.
Note:
With the RECALL button, you can always return to the previously accessed transmitter.
Editing programs
Here you can move and delete the found stations within your program slots. You can also create your own favorites list. To do this, use the arrow keys to select the desired transmitter and press the FAV key on the remote control button to select it.
Teletext
In DVB-S/S2, DVB-T, DVB-C: Press the TEXT button to open and close the teletext.
EPG (Electronic Program Guide)
By pressing the EPG button, open the Electronic Program Guide. Use the arrow keys to navigate through the TV program and view more information about each show.

SELECTION OF THE INPUT SOURCE
Press the source button on the TV or your remote control, select the input source you want and confirm with „Enter“.

AUTOMATIC CHANNEL SEARCH WITH INITIAL INSTALLATION
In the „Options“ menu, select the initial installation line and confirm it with Enter.

Confirm this search mode again with entering.

Confirm with Enter and select and confirm the „Search“ line in the following image.

PICTURE MENU

Press the MENU button to view the main menu.
Then use the arrow keys to select „Picture“ in the main menu. You can choose from four different image modes here. Please note that only the „Personal“ mode can be changed.

SOUND MENU

You can choose from five different tone modes here.
Please note that only the „Personal“ mode can be changed. You can also activate or deactivate the Bluetooth function here.

MENU TIME

The TIME submenu displays the following menu items: UHR, TIMEZONE, EINSCHLAFTIMER, and OSD TIMER.
Here you can set the automatic power-off and power-off time. You also set the sleep timer and the display time of the OSD menu.

MENU PROTECTION

In this menu, you can enable parental controls. After dialing down with the down arrow key, you will now be asked for the password set ex-works. Now enter the default password: 0000. To change this, select the Set Password menu item. Now you can enter a new password (use number block) and confirm it on the 2nd line.

SETTING MENU

In the SET menu, you can set the menu language, display, and deaf aid. The device can be retracted back to its basic settings under the item „Factory Settings“.
CI+ Information
Here you can find information about the CI+ module.
5 V active antenna at DVB-T reception
Switch on kanal in the main menu under the menu item.

MENU MEDIA (USB CONNECTION)

The USB port is located on the side of the TV (see pages 6-8). First, plug your USB stick into the USB port. Then press the SOURCE button on the remote control. The port menu appears on the screen and here you select the item Media. The stored data of the USB stick is now loaded automatically. In the menu, you can choose between the individual categories PHOTO, MUSIC, FILM, and TEXT.

PVR ACCESS (OPTIONAL)

You can record to external storage. Please note that not all USB sticks or external hard drives are compatible. Especially USB 3.0 storage media can cause problems. With the variety of models and memory sizes, we cannot guarantee the full function of all commercially available USB storage. Above all, a speed of more than 5MB/s is important.
You can start the recording, both as a timer recording in the EPG menu and as an instant recording by pressing the „Media2“ button of the remote control. This is stored in the media menu under „Film“. You can access this menu via the source function on the remote control.
Timeshift starts via the „D.Prog“ button on the remote control. The „Stop“ button takes you back to the live image. Timeshift is controlled via the image of function keys that have been displayed.

OPERATING FOR FASTSCAN

1. Press the menu button

2. Select automatic search and press Enter

3. Arrow key press Fast Scan
   

4. Enter

5. On selection Provider with the arrow ▶button you can set the country lists
   
   1/11 CanalDigital HD
   2/11 CanalDigital SD
   3/11 TV Vlaanderen HD
   4/11 TV Vlaanderen SD
   5/11 Telesat Belgium
   6/11 Telesat Luxembourg
   7/11 HD Austriasat
   8/11 AustriaSat Magyaro
   9/11 Skylink Czech
   10/11 Skylink
   11/11 Germany

6. Move the marker down to Search and press Enter (example)
   

7. And the question Yes with the arrow◀ Confirm button

8. . After 5s, the download begins

9. At the end, the first program in the list will appear.

This is a short version of our user manual. If you would like more information or need more detailed instructions, please visit our website: www.alphatronics.de

AUTOMATIC SEARCH WITH NEW / OTHER SATELLITE

Select the main menu.
Select Automatic Search and press ENTER to enter the submenu.

Press ENTER again.

Satellite: Use the buttons to select the satellite you want.
Channel Type: Use the keys to select whether you want to receive „All“ programs or only „Free“ or only „Encrypted“ programs.
Service Type: Use the buttons to select whether you want to search for and save all programs.
Search Mode: Press the button to select the search mode (Preset, Auto, Blind Scan). Usually, it is a blind scan.
Preset loads the factory-preset channel list.
Select button to the menu item „Search“ and press the „ENTER“ button around to start the search.

DVB-T / T2 SEARCH

Channel search for DVB-T / T2 and DVB-C(recommended procedure also for countries such as the
Czech Republic, Slovenia, and others)
Button Source, Changing to Antenna

DVB-C SEARCH

Button Source, Changing to Cable

Before a search in DVB-T / T2 mode, you should use the 5V antenna voltage in the main menu. Most antennas require this setting.
It is recommended to select the setting OFF for the line LCN.
LCN means automatic pre-sorting but does not work in Germany, so reordering by hand is recommended.

Selection DTV and Germany with the arrow right button.

The program search results in more than 60 programs, depending on the region.

In most cases, the private channels are displayed first, but they require the Freenet module to decrypt. Please place free programs in the first places with the function „Edit Programs“.

FIXING THE STAND

TROUBLESHOOTING

Please use the list below to try to resolve the most common errors before contacting Customer Service. A minor adjustment can often solve the problem and restore your screen reception.

• Adjust brightness and contrast.
• Check the input signal of TFT-LCD/LED.
• Check the power connection to the unit with the screen.
• Check Main Display selection.
Picture is not clear| • Check that the Video cable is plugged in.
• Refer to the Picture Adjustments Menu in the OPERATING INSTRUCTIONS.
Image is fuzzy| • The power could be failing, try connecting the unit to another power outlet.
• Move the unit away from the magnetic equipment, such as Wireless Receiver, AC Transformer, etc.
• Refer to the Picture Adjustment Procedure Menu in the OPERATING INSTRUCTIONS.
Colours are distorted| Check that the Video cable is plugged in securely.
Screen bounces or has wavy oscillations| • Check Video input range (V-sync Max. 75Hz, H-sync Max.48.08KHz)
• Make sure Video cable connections are secure.
No sound| • Check speaker line connections.
• Sound might be muted, try adjusting the volume.
Only one speaker operates| • Check audio wire connections with a source device.
• Check the unit’s speaker wires are securely connected.
Remote Control inoperative| • Check for light or obstacle interference with remote control signal and move the unit to another location.
• Batteries are dead; replace batteries with new ones.
---|---
Poor Picture Reception and/or Poor Sound Quality| • From TV mode, select the appropriate setting and Rerun AUTO SEARCH sender.
When all else fails| • Pull the AC plug off, wait for 1 minute later and then plug the power again.

Further information:

stickers note). In the event of the polarity of the device, the warranty expires.

Hint:
Ambient temperature: -10 – +45° C
Storage temperature: -20 – +60°C

CUSTOMER SERVICE

You have purchased this device with a three-year warranty. If you encounter any errors or problems, please contact the seller.
Note
Changes are reserved for designs, functions, and equipment. The sample images used are only suitable for illustrative purposes and may differ from the original.

Hereby, the
alphatronics GmbH, Breitengraserstraße 6, 90482 Nürnberg, Germany,
declares that the devices
K-19SB+ (386272) | K-22SB+ (386273) | K-24 SB+ (386274)
in accordance with the essential requirements and the other relevant provisions
of Directive 2014/53/EU.
The full declaration of conformity can be found at:
www.alphatronics.de/de/support/konformitaetserklaerungen,14/
Further information for TVs equipped with Bluetooth:
Bluetooth 4.2
Range: 2402 – 2480 Mhz
Power: 1mW
USB Playback port: DC 5 V 500 mA
For more information about our products, please visit the EPREL product database. The respective registration number (6 digits) is enclosed in brackets after the respective device name.

alphatronics GmbH
Breitengraserstraße 6
90482 Nürnberg
Tel. +49 (0) 911 21 65 54-0
Fax +49 (0) 911 21 65 54-65
E-Mail: [email protected]
Web: www.alphatronics.de

References

• alphatronics – Mobile Fernsehgeräte für Reisemobil und Caravans
• Support | alphatronics GmbH -

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>