electriQ EIQ-32M4K144FS 32-Inch LED Monitor User Manual
- June 6, 2024
- ElectriQ
Table of Contents
electriQ EIQ-32M4K144FS 32-Inch LED
**Monitor User Manual**
Thank you for choosing electriQ
Please read the user manual before using this monitor and keep it safe for
future reference
Visit www.electriQ.co.uk to view our entire range
of Intelligent Electricals
SAFETY INFORMATION
-
Read these instructions – All the safety and operating instructions should be read before this product is operated.
-
Keep these instructions – The safety and operating instructions should be retained for future reference.
-
Heed all warnings – All warnings on the appliance and in the operating instructions should be adhered to.
-
Follow all instructions – All operating and usage instructions should be followed.
-
Do not use this equipment near water, or in humid environments – The appliance should not be used near water or moisture e.g. in a wet basement or near a swimming pool.
-
Clean only with a dry cloth. Do not use solvents or petroleum-based fluids.
-
Do not block any ventilation openings.
-
Do not install near any heat sources such asradiators, stoves or other apparatus (including amplifiers) that produce heat.
-
Do not tamper with the supplied plug. This plug is a BS1363 standard plug.
-
Protect the power cord from being walked on ortrapped, particularly atthe plug and at the point where it exits from the appliance.
-
Only use attachments/accessories specified by the manufacturer.
-
Use only with a cart, stand, tripod, bracket or table specified by the manufacturer orsold with the apparatus. When a cart orstand is used, use caution when moving itto avoid any injuries or damage from ittipping over.
-
Unplug the apparatus during lightning storms or when unused for long periods of time.
-
Refer all servicing to qualified personnel. Servicing is required when the apparatus has been damaged in any way, such asif the power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus or it has been exposed to rain or moisture, it does not operate normally or has been dropped.
-
Please keep the unit in a well-ventilated environment.
-
The monitor should only be connected to a mains power supply asrated on the back of the equipment.
-
To prevent overload, do not share the same power supply socket with too many other electronic components.
-
Do not place any connecting wires where they may be stepped on ortripped over.
-
Do not place heavy items on the cable as this may cause damage.
-
When removing from a socket hold by the plug and not the wires.
-
Disconnect the power immediately and seek professional help if the plug or cable is damaged, liquid has spilt onto the unit, if accidentally exposed to water or moisture, if anything accidentally penetrates the ventilation slots or ifthe unit does not work normally.
-
Do not remove the safety covers. There are no user serviceable parts inside.
Trying to service the unit yourself is dangerous and may invalidate the product’s warranty. Only qualified personnel should service this apparatus. -
Do not block ventilation slots on the back cover. The monitor can be placed in a cabinet but ensure at least 5cm (2″) clearance all around. Do not tap or shake the screen, this may damage internal components.
-
Due to our continuous product development, the operation and or features of the product received may vary slightly from the information provided within the manual.
-
WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. The apparatus shall not be exposed to dripping or splashing and objects filled with liquids, such as vases, shall not be placed on the apparatus.
-
WARNING: The wall plug socket is used as a disconnection device and should remain readily accessible.
-
WARNING: The batteries shall not be exposed to excessive heatsuch as direct sunlight or fire.
-
Although every effort is made to maintain the accuracy of the manual, due to continuous product development, some variation from the manual is possible.
-
The availability of features and settings may vary depending on the input source and method of connection.
WHAT’S INCLUDED
NOTES:
- Due to the heavy weight and dimensions of the LCD screens and their fragile nature, we recommend that they are unpacked and assembled by 2 people.
- electriQ and its distributors and dealers are not liable or responsible for damage or injury caused by improper installation, improper use or failure to observe these safety instructions. In such cases any guarantee will expire.
- The stand can be removed from the rear of the monitor by pressing the quick release button on the rear of the monitor.
STAND INSTALLATION
-
Open the package, take out the Styrofoam and place it on a horizontal table.
-
Remove the upper foam, remove the film bag on the fuselage, and place the display on the lower foam.
-
Take out stem and base, Lock them with 2pcs KM4*12mm screws. (Screws are in the accessory bag, 1pcs buffer)
-
Insert the stem to the slot of back cover, them lock them with 4pcs CM4*26mm screws. (Screws are in the accessory bag, 1pcs buffer)
-
Hold the stand by hand and stand up the machine (Note: During the process of standing up the monitor, please do not pinch the screen directly with your hand to prevent the screen from breaking)
CONNECTIONS AVAILABLE ON THE MONITOR
GETTING STARTED
MONITOR CONTROLS
INTIAL SETUP
Connect the monitor to a power outlet.
- Press the power button on the monitor or to turn it on (The indicator will be blue).
- Connect the relevant cable to the corresponding input on the monitor. The source will be automatically detected.
- To change between inputs, press the “Source” button to enter the source menu. Use the “ ∧ ” and “ ∨ ”buttons to choose the input source between Auto Select,DP1,DP2 and HDMI1,HDMI2.
MENU OPTIONS
The menu for the monitor can be accessed by pressing the menu button on the control panel. This menu is separated into the following sub menus: Picture Settings, Image Settings, Colour Temperature, OSD Settings, Reset, and Miscellaneous options, details of each menu can be found in the following section.
OSD MENU
INPUT SOURCE
PICTURE
COLOUR SETTINGS
ADVANCE SETTINGS
ULTRA HDR
AUDIO
QUICK LINK
OTHER
SPECIFICATION
TROUBLESHOOTING
ENVIRONMENTAL PROTECTION
Recycling facilities are now available for all customers at which you can deposit your old electrical products. Customers will be able to take any old electrical equipment to participating civic amenity sites run by their local councils. Please remember that this equipment will be further handled during the recycling process, so please be considerate when depositing your equipment. Please contact the local council for details of your local household waste recycling centres
electriQ UK SUPPORT
www.electriQ.co.uk/support
If the unit fails to operate call: 0330 390 3061 or complete the online form
Office hours: 9AM – 5PM Monday to Friday
www.electriQ.co.uk
Unit J6, Lowfields Business Park
Lowfields Way, Elland
West Yorkshire, HX5 9DA
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>