simpl 56010 Photo Memory Phone Hands Free Dialing User Guide
- June 6, 2024
- Simpl
Table of Contents
56010 Photo Memory Phone Hands Free Dialing
6: Temporary Handset volume increase 7: Temporary Handset volume decrease
– Plug the telephone into a telephone socket with active service.
– Pick up the handset – Press & hold the selected photo button for about 3
seconds until you hear a ‘beep’, then release
the button. – Enter the number using the keypad as you would normally dial.
Ignore any dial tones, busy signals
or other sounds you may hear during the programming process. – Press & release
the same photo key again. Do not long-press or wait for a beep this time. –
Hang up the receiver. The number is saved. Stored numbers will be retained
when phone is
unplugged.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>