Newfi BM-GP001 Music Starry Galaxy Projector User Manual
- June 6, 2024
- Newfi
Table of Contents
Music Starry Projector
User Manual
Unboxing Check
Thank you for purchasing our products, please read the instruction manual carefully before use. The instruction manual contains necessary safety advice and user instructions, follow the instruction manual to operate in order to avoid damaging the product for misuse. Check whether the product is damaged or not when you receive the product.
Package list:
Music starry projector x 1
Remote controller x 1
USB cable x 1
User manual x1
Warnings:
The power requirement of this product is USB DC 5V/2A. Once the range is
exceeded, please use the regulator device, otherwise it II affect its service
life.
Notice:
- Strictly in accordance with the instructions of this operation, do not disassemble the host and accessories.
- This product is suitable for indoor use.
- The product is projected by LED and laser combinations, please do not use laser shone directly in eyes and keep away from children.
How to use:
- Indoor use, projecting in the sky direction.
- How to use the light projector, as shown below.
- Connect Bluetooth “BTK10′ of the smartphone to play music.
- Use the correct method of the remote control to make sure the remote control is pointing at the infrared sensor.
Host button function description
- Automatic recognition USB data. Note that this projector can auto recognize and play music while inserting USB memory. USB should contain some songs 0 I. Ocean wave 3 levels brightness adjustment
- When Power on, LED light and laser light keep on; short press this key control LED light switch, long press control laser light switch
- DC Input: 5V/2A
- Short press play a previous song; Long press reduce the volume
- Short press play next song; Long press increases volume
- Short press control music Play/Pause; Long press change USB to Bluetooth Connect Bluetooth and U-Disk at the same time, it’ll recognize U-Disk music for priority)
- Short press achieve Bluetooth/USB mode switch when connecting Bluetooth and USB at the same time
- Power ON/OFF
Statement
This product has been comprehensive and rigorous testing at the factory, the user should strictly follow the warning and instructions. Improper use resulting in product damage is not covered by the Company’s warranty.
Remote control function description
Instruction:
When projector light connects power; LED blue light keeps on and in non-moved
status; laser light enters gradation mode, it can default automatically switch
off in 4 hours.
-
Control LED ocean wave light ON/OFF
-
Control Laser light ON/OFF
-
Press “R”, red light ON; Press again, red light OFF (at basic of light on at the first time)
-
Press “G”, green light ON; Press again, green light OFF (at basic of light on at the first time)
-
Press “B”, blue light ON; Press again, blue light OFF (at basic of light on at the first time)
-
Press “W”, white light ON; Press again, white light OFF (at basic of light on at the first time)
(Note: Four-color RGBW buttons can be combined by two to form a double- color projection)
-
Control device volume up
-
Control device volume down
-
Select playing the previous song
-
Select playing next song
-
Voice control: Connect with Bluetooth or USB memory playing music, press “Micro” icon, ocean wave and starlight will fast-changing following music sound
-
Control ocean wave moving speed up (Pause–Slow–Medium–Fast)
-
Control ocean wave moving speed down (Fast–Medium–Slow–Pause)
-
Long press 3 seconds to cancel timing function. When LED, laser light flash and emit “bleep” sound three times as prompting
-
Press “FADE 1” , ocean waves move circularly in R-G-B-W single color mode and laser light changes to gradation mode (the same feature as power On)
-
Press “FADE 2”, ocean waves move circularly in RB-RG-RW-BG-BW-GW double-color mode and laser light changes to gradation mode
-
Long press 3s control timing function for 1 hour. When LED, laser light flashes and emit “bleep” sound once time as prompting. 1 hour later, it’ II automatically switch off
-
Control LED ocean wave light brightness (In order of 70%–40%–40%–70%–100%)
-
Press “LASER light” to achieve either Laser light stay on or enter into gradation mode
-
Long press 3s control timing function for 2 hours. When LED, laser light flash and emit “bleep” sound 2 times as prompting. 2 hours later, it’ II automatically switch off
-
Control Music Switch On/Off
Notice:
This product comes with 4 hours automatic shutdown function that works for 4
hours and shut down automatically.
Specification
Maximum LED Power: 2 4W
Green Laser: <1MW
Power Input: USB DCSV / 2000mA
Operating Temperature : 14°F – 104°F (-10°C – 40°C)
Projection Coverage: 161-538 ft2 (15-50d)
Product Dimensions: 4 123 164 mm
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which there receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment. This
device complies with Part15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
RF Exposure Information
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 20cm between the radiator and your body.