PLUG IN FESTIVAL IceCube 25 Compressor Cool Box User Manual

IceCube 25 / 30 / 40 / 50
Operating instruction

Please read this user manual carefully before using the cooler.
The manufacturer is not liable for any damage caused by improper use.

Important safety information

Please read these operating instructions carefully before initial operation and keep them in a safe place. If you hand over your mobile fridge (hereinafter referred to as „device“), please also hand over these operating instructions.

The manufacturer is not liable for damage caused by improper use or incorrect operation.

This is a warning sign. It is used to warn of the possible danger of injury. Observe all safety instructions with this icon to avoid possible injury or death.

You will find the complete operating instruction and updates for your product at www.pluginfestivals.de

Warnings in these operating instructions are classified as following for better differentiation:

Indicates a hazardous situation which, if not avoided, could result in death or serious injury

Indicates a hazardous situation which, if not avoided, may result in minor or moderate injury

Indicates a hazardous situation which, if not avoided, may result in damage to property or damage to the device

Please observe the safety instructions. If you have any questions, please contact our customer center. You can find the telephone number on the back.

Warning

Safety instructions

Non-observance of these safety instructions may result in serious injuries or even death!

• Children aged between 3 and 8 years may only load and unload the device. Commissioning is not permitted. Children under 3 years of age must be kept away from the device. Parents are liable for their children
• Cleaning and maintaining of the device is not allowed by children without supervision
• Children are not allowed to play with this device
• Every user must have received an instruction in the safe use of the device and understand the resulting dangers
• Children over 8 years of age may only use this device if they are supervised and have understood the instructions
• Persons with reduced physical, sensory or mental abilities or a lack of experience and knowledge may use this device only after  instruction and if they have understood them

 Risk of death by electric shock

• If the device shows visible damage, you are not allowed to put it into operation
• If the connection cable is damaged, it must be replaced by a qualified person to avoid any hazards.
• Repairs on this device may only be done by qualified technical staff
• Nonobservsance can result in considerable dangers

 Risk of Explosion

Do not store explosive substances such as aerosol cans in the device.

 Risk of fire

• When setting up the device, ensure that the connecting cable is not pinched or damaged
• Keep the ventilation openings clear on all sides, ensure that there is sufficient ventilation for installation constructions
• Do not use mechanical devices or other aids to accelerate the defrosting process
• Do not damage the cooling circuit

Caution

 Risk of Health

• First, check whether the cooling capacity is sufficient for your application and whether it meets the requirements for cooling your  food or drugs
• Foodstuffs may only be stored in the device in their original packaging or suitable containers
• If the lid of the device is left open for a long period of time there may be a strong temperature increase in the cooling  compartments
• If you do not use the device for a longer period of time, please switch it off. Defrost the device completely. Clean and dry all  surfaces thoroughly (see chapter 4)
• Leave the lid open (at least in the ventilation position) to prevent mold growth.
• Clean the surfaces that may come into contact with food regularly

Risk of Damage

• Only transport the device in an upright position
• Compare the existing power supply with the voltage specification on the nameplate
• Do not use any electrical appliances inside the mobile fridge unless it is recommended by the manufacturer
• The device may not be exposed to rain
• At the end of its service life, this device must be disposed correctly (see chapter 13)

Product description

Device

1. Lid
2. LC-Display
3. USB-Port
4. Handle
5. Connection for power cable (12 V & 230 V)| 6. Fan grid
7. LED-light
8. Chain
9. Drain plug
---|---

Display

11. On / Off Button
12. SET Settings
3. Voltage
14. Temperature [°C] 15. Battery indicator (external battery)| 16. Battery Protection Mode
17. MAX or ECO Mode
18. Temperature control (-)
19. Temperature control (+)
20. USB – plug
---|---

Handling

Connecting the device

Only connect the device to the power supply system with the supplied cable.

To 12V On-board Power Supply of Vehicles
For connection to the 12V/24V on-board power supply of vehicles, please use this connection cable. Use the 12V/24V socket (cigarette lighter)
To the Electrical Grid
Use this cable to connect the device to the electrical grid.

Switch on

If the device is connected to the power supply, press the On/Off button **11** for at least 3 seconds to start the device.

For optimum cooling performance, use food which has already been cooled down.

Settings MAX & ECO mode

Press the SET button **12** briefly to enter the different modes of the device.
Then press the SET button **12** again to switch the desired mode.
Please note: The factory setting for delivery is MAX

Set temperature

To set the temperature in the cooler, press the respective temperature control **18** to reduce the temperature or **19** to increase the temperature.

The recommended temperature settings to ensure optimal storage of the food is 0-4 ° C.

Using the device without power

Please ensure an uninterrupted power supply during operation. The device is not designed for operation without power supply and can only keep its temperature to a limited time, depending on the outside temperature.

Using the device in a car (Battery protection mode)

The device is equipped with a three-stage battery protection. To protect your battery, the device switches off when the battery voltage falls below the respective battery voltage.

• Use the High mode if you have connected the device to your starter battery
• Use the Medium mode if you have connected the device to your starter battery and the conditions are good (e.g. no severe cold, no  severe heat, no long periods of standing)
• Use the Low mode only when using separate supply batteries to ensure vehicle starting. If this mode is used when connected to the starter battery, it may not be possible to start the vehicle.

Adjustment:
Press the SET button **12** for at least 3 seconds until the currently set mode (H, M, or L) flashes.
Then press the SET button **12** again to switch the desired mode.
The corresponding mode will be saved as soon as the letter stops blinking.

PV = Protection Value
SV = Startup Value

Error Codes

or change the battery protection mode
F2| Fan Safety Shut Down
power supply and let it| Please check the ventilation holes for any foreign objects or dirt Check if the fan can spin free. Cut the device from the cooldown for one hour. If the  problem still comes up, contact the customer service
F3| Protection mode for frequently used compressor| Please contact the customer service
F4| Cooling System Overload| Cut the device from the power supply and let it cool down for one hour. If the problem still comes up, contact the customer service
F5| Thermal Protection Cooling System or Ambient Temperature| Cut the device from the power supply and let it cool down for one hour. If the problem still comes up, contact the customer service.
F6| Hardware Failure| Cut the device from the power supply and contact the customer service
F7| Temperature Sensor Short Circuit| Cut the device from the power supply and contact the customer service
F8| Temperature Sensor Open Circuit| Cut the device from the power supply and contact the customer service

Switch off and store

To switch off the device, press the On/Off **11** button for at least 3 seconds and unplug the device from the power supply system.
When the device is not in use, please remove all food, clean the device (see chapter 4) and store it safely and dry.
Leave the lid open a little to ensure air circulation.

Cleaning

Safety instructions

• Disconnect the device from the power supply system before cleaning!
• Do not immerse the device in water!
• Do not expose the device to running water

Proper cleaning of the device

• Only clean the device when it is switched off
• Take out all food before cleaning
• To defrost, remove the plug in the bottom
• Wipe the inside of the appliance with a damp cloth and, if necessary, a little kitchen cleaner and rub it dry
• Leave the lid open a little bit for air circulation

Intended use

The mobile fridge is suitable for:
✔ Use in Vehicles
✔ Camping
✔ Cooling food and keep food frozen

The mobile fridge is not suitable for:
✖ Storage of corrosive or solvent-containing substances
✖ Freezing of food products
✖ Use as build-in device

Tips for efficient use

• Use ice packs or frozen PET bottles
• Spread the ice packs between food
• Always pre-cool drinks and food
• Never leave the cool box open longer than necessary
• Do not place the cool box in direct sunlight
• Fill up the cool box completely (the more empty space in the interior of the cool box, the faster the cool box warms up)
• Always close the cool box completely
• Cold contents up, warm contents down

Cooling food

This is only a recommendation:
Please find out for yourself how the contents of your cool box can be optimally cooled in order to store it as best as possible for the longest possible period so that food waste is avoided.

• Keep temperature fluctuations as low as possible
• Only open the cool box as often and for as long as necessary
• Store food in such a way that the air can still circulate well
• Adjust the temperature to the amount and type of food
• Food easily absorbs odors and gives off odors or aromas. Always store food covered or in closed containers or bottles

Using the smartphone wireless app

• Download the “Plug-in Festivals” app from the Appstore or GooglePlay
• Activate your BT connection on your smartphone and open the app.
• Press Search & select the cool box found
• The word “APP” is shown on the display of the cool box. Press the set button **12** to confirm. You can now conveniently monitor and adjust all settings via your smartphone.

Lid dual opening

• Remove the chain with a screwdriver
• Take the hinges down
• Install the hinges on the other side between lip and tank
• Install the chain again on the other side between lip and tank

Climate Class

• Extended temperate zone: This cooling unit is intended for use in ambient temperatures between 10 ° C and 32 ° C
• Tropical zone: This cooling device is intended for use in ambient temperatures between 16 ° C and 43 ° C

Disclaimer of warranty

The statutory warranty period shall apply. In case of a defect, please contact the manufacturer or your authorized distributor.
To process your warranty or repair request, you must send the following documents:

• Copy of the invoice with date of purchase
• Description of the error as detailed as possible

Spare parts

Spare parts can be ordered or access to professional repairers can be made by email or telephone. Use the email address: info@pluginfestivals.de or the telephone number given at the end of these operating instructions.

Spare parts such as door handles, door hinges, shelves, and inserts are available for a period of at least seven years after the last copy of a  model has been placed on the market, and door seals for a period of at least ten years after the last copy of a model has been placed on the market.

Disposal

If possible, place the packaging material in the recycling waste
If the device is finally taken out of operation, please contact the nearest recycling centre for information or your authorized  distributor about the applicable disposal regulations

Technical data

Technical data| IceCube 25| IceCube 30| IceCube 40| IceCube50
---|---|---|---|---
Model| C25| C30| C40| C50
Energy efficience class new
[from march 2021]| F
Energy consumption [kWh / year] [Declared value]| 93| 94| 95| 96
Energy consumption [kWh / year] [Measured value acc. to regulation (EU) 2019/2019]| 84| 86| 88| 81
Volume [I]| 24| 30| 38| 49
Ambient temperature [°C]| + 10 bis +43
Climate class| N, T, ST, SN
Sound noise level [db(A)]| 45
Rated voltage [V]| 12, 24, 230
Rated current [A]| 5 A@12 V
2,5 A @24 V
0,5-1,2 A @ 230 V| 6A@12 V
3 A @24 V
0,7-1,5 A @ 230 V
Rated power ECO-Mode [W]| ca. 30 W| ca. 40 W
Rated power MAX-Mode [W]| ca. 60 W| ca. 80 W
Temperature range [°C]| – 20 bis + 20
USB-Port| 5 V, 2 A
Refrigerant charging [g]| 24| 40| 40| 40
Refrigerant type| R1234 yf
Product dimension (LxBxH) mm| 652 x 363 x 301| 652 x 363 x 351| 652 x 363 x 421| 652 x 363 x 491
Weight [kg]| 13,5| 14,6| 15,4| 16,3

Further technical information according to Regulation (EU) 2019/2016 can be found at the following web link: https://pluginfestivals.de/wp- content/uploads/2020/06/Datenblatt.png

Customer Service

For further questions – please contact our customer service:
Plug-in Festivals GmbH
Wittelsbacherplatz 7
82256 Fürstenfeldbruck

• info@pluginfestivals.de
• 0173/8279620
• 0151/23007174

Plug-in Festivals GmbH, Benutzerhandbuch IceCube (2021)

References

• Plug-in Festivals unschlagbar in Preis-Leistung
• Plug-in Festivals unschlagbar in Preis-Leistung

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>