VITRUM DESIGN 0KE050T10 IP Touch Panel 5” Bianco Nero KNX Instructions
- June 6, 2024
- VITRUM DESIGN
Table of Contents
VITRUM DESIGN 0KE050T10 IP Touch Panel 5” Bianco Nero KNX
Installation
- Install the flush-mounted box, according to the device model (See BOXES AND DIMENSIONS)
- Apply the supplied frame over the wall box
- Power is supplied via POE (Power Over Ethernet).
- If a POE switch is not available, provide a POE INJECTOR
- Connect the net to the Horizone touch and fix it to the wall, using the lateral screws to secure it to the frame
Configuration
- To change the main screen use the pencil icon in the upper right corner. The default PIN are “9999” for the Administrator and “1234” for the User.
- To add an application to the menu, press the symbol “+” at the top, select an app from those available, choose an icon and type the description.
- Through the configuration button, at the top left, you can access the following settings
- “Administrator PIN” and “User PIN”: shows the current PIN and allows you to change it;
- “Select background”: allows you to select the background of the main page
- “Do not display logo”: allows you to choose whether or not to display the Eelectron logo on the main screen
- “Android Settings”: allows you to access the operating system settings
- “Network configurations”: configures the LAN network parameters, being able to set a static addressing (by default the device operates in DHCP mode)
- “Firmware Update”: allows you to update the firmware of the device, if available via the Internet
- “Screen off timer”: allows you to configure a time after which to turn off the screen when device is not used;
- “Reboot device”: reboot the device
- “Exit the App”: allows you to exit the menu environment, and switch to the graphic environment of the operating system, for example to install new applications.
ATTENTION: it is recommended to not change the default value of screen brightness (40%), in order to avoid damaging the device. It is also advisable to turn the display off automatically after a time not exceeding 60 seconds, to extend the operating life of the panel.
Configuration Horizone touch screen
To access Horizone web services from the Horizone Touch Screen, open the
“Horizone” app and configure it as in the example figure below:
In particular, be sure to:
- select “Zyk” as home network;
- enter the IP address of Horizone also in the remote settings;
- Deselect HTTPS in remote settings.
Boxes and dimensions
| 0KE050T10 | 0KE080T10 | |
|---|---|---|
| Dimensions | 81x132x14 | 224x149x16 |
| Boxes | Inwall box 2M (ex: BTicino 502E) |
Round box Ø60 (es: Gewiss 24232)
Inwall box 3M (ex: BTicino 503E) same mounting direction
| Inwall box BTicino 16204
ULTERIORI INFORMAZIONI
Per uso domestico solo in interni. L’apparato richiede alimentazione costante
e non va inteso come dispositivo di sicurezza.
DISPOSAL
The crossed-out bin symbol on the equipment or packaging means the product
must not be included with other general waste at the end of its working life.
The user must take the worn product to a sorted waste centre, or return it to
the retailer when purchasing a new one. An efficient sorted waste collection
for the environmentally friendly disposal of the used device, or its
subsequent recycling, helps avoid the potential negative effects on the
environment and people’s health, and encourages the re-use and/or recycling of
the construction materials
References
- Eelectron, Sistemi di Domotica KNX e Building Automation
- VITRUM DESIGN | Smart Living – La domotica semplice ed elegante
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>