RUNTON TWSX9 TWS Stereo Bluetooth Headset User Manual
- June 6, 2024
- RUNTON
Table of Contents
Stereo Bluetooth headset
USER MANUAL
Precautions :
- This headset is not suitable for high temperature and humid environments (eg bathroom),
- Failure to use the device for a long time will cause the battery to be over-discharged with will make the product not work. It is recommended to charge the headset and the charging box every 3 months.
Button function and indicator
Switch machine/call button
- Long press call button for 3-4 seconds to turn on / off
- Press briefly to answer a call or to end a call
- Long press for 1-2 seconds to reject the call
- The main ear chief presses the drop, and the auxiliary ear chief presses the voice assistant
- Bluetooth is not connected. Double click to switch between Chinese and English. English is the default for power on
- When playing music, press briefly to pause/play the music
- When playing music, double-click the next music in the main ear and the last music in the auxiliary ear
- Triple tap the main ear to increase the volume, triple tap the auxiliary ear to decrease the volume
( Note: after the left and right earphones are paired, the red and blue lights flash in the main ear, and the other is the auxiliary ear )
The low-power red light flashes four times. and the red light is always on when charging; Full charge blue light is always on for 10 seconds and oft matching medium red blue The light flashes alternately; the blue light flashes slowly
Turn on the blue light for a long time Turn off the red light three times to
turn off; Music playing blue light flashes every 1 second
Music pause blue light slow flashing; Incoming blue light slow flashing; Slue
light flashes slowly during the call
How to connect
Single ear pairing
Support to connect Bluetooth devices with V5.0 + EDR or above
- Take out the left 04 to right (R) headphones
- Simultaneously press and hold the left (L) or right R) headset button (contact) button for 3-4 seconds until the blue and red. light of the Bluetooth indicator flashes alternately, and the headset will have a voice prompt of pairing mode.
- Select (device name – x9) from the Bluetooth device list of your mobile phone and click Connect.
Binaural TWS pairing
- Pair of ear-opening automatically Take the headset out of the charging box for the first time, and the left and right channels of the headset will automatically pair (it must be in the state of long charging red light); at this time, only one device red and blue lights will flash alternately, and the pair of ears is completed. Select (device name – x9) from the Bluetooth device list of your phone and click Connect
- Dual ear manual power on matching mode Take the headset out of the box for the first time, press and hold the left and right earphone buttons (touchpoints) for 2-3 seconds, and the blue light of the headset flashes (the left and right earphones are in the pairing state, and the automatic pairing takes 3-5 seconds).
At this time, only one device flashes the blue and red lights alternately, and the pairing of both ears is completed. Select (device name x9) from the blue tooth device list of your mobile phone and click Connect
Binaural inability to match
If the headset blinks in blue and red after it is used alone or turned on, the
pair of ears cannot be completed, just operate as follows:;
- Put the left and right earphones into the charging compartment at the same time, but the two earphones into the charging state, cover the charging compartment cover, reset the earphones, and then open the cover
- now the headset has been restored to the factory settings.
Parameter configuration
True Wireless Connectivity (TWS) enables wireless stereo, left and right channel separation, and HIFI sound. Both the left and right ears have full Bluetooth functionality and can be used individually or in pairs.
Bluetooth version :| Dual-mode Bluetooth V5.0+ EDR, ultra-low power
consumption
---|---
supporting agreement| A2DP1.3/HFP1.6/HSP1.2/AVRCP1.6/D11.3
Bluetooth band| 2.4G H Z
Bluetooth transmission distance| 15 M
battery capacity| 50mAh special custom rechargeable polymer lithium battery
built into the left and right ears, charging box lottery capacity 500mAh
Standby time| One ear can stand for 100 hours, and both ears can stand for 60
hours.
Call/playtime| Single ear play/talk time approx: 4-5 hours Binaural play/talk
time approx: 3-4 hours (Support caller ID, IOS system power display)
Note: The call supports a bilateral Bluetooth headset. Shutdown, playback, and pause can be controlled by the multi-function button of any connected headset, and the other headset will be synchronized. Press and hold the multi-function button to connect automatically when you turn it on next time.
Headphone charging
The headset and headphone case is equipped with a built-in rechargeable
battery that is not removable and ensures that the headset is fully charged
when first used.
Headset charging box: connect the type-C cable to the charging socket on the
headset box, and plug the cable into the USB 5V output port power supply. The
indicator light of the digital display is always on during charging the
headset box. If the charging is not started, please unplug the charging cable
and plug it in again. When the headset charging box is fully charged, the
digital display indicator will change to 100%. Unplug the charging cable from
the power socket.
Product features: large screen digital display outside the cabin, master
the power of charging box and headset at any time!
Additional functions: after the charging chamber is closed, the built-
in germicidal lamp starts to work, and the ear cap and engine room enter
Conduct sterilization and cleaning and stop working after the 20s!
Headset : The headset does not need a charging cable, just put the
headset back into the charging box and cover the lid of the headset box. When
the headset is placed back in the headset box, you must confirm that the
headset is fully replaced; when the headset indicator turns red, the indicator
light in the headset box turns white and the headset begins to change. If you
have not started charging, take out the headset and put it back When the
headset is fully charged, the red indicator light will tum white and the
charging box will automatically tum off the power.
Repeated charging and discharging of the headphones will result in degraded
battery performance over time, This is normal for all rechargeable batterie.
When the headset battery is low
The earphones will beep at intervals, and the indicator light flashes at
intervals.
If the headset is powered off during a call, it will automatically transfer
the call to the phone.*
Warranty Card
Dear users, this warranty card is an important certificate for applying for warranty service. Please fill in and keep it with the seller, thank you!
User
information| user name|
---|---|---
E-mail|
contact address|
contact number|
Postal code|
Product information| Product name|
Product number|
Product barcode|
Dealer information| Name|
Address|
contact number|
Sales date|
Invoice number|
Postal code|
Remarks|
*This form is confirmed by the dealer’s stamp; for products subject to the relevant warranty provisions !
FCC statement
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference
that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
FCC Radiation Exposure Statement
This device complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment. This transmitter must not be co-located or operating
in conjunction with any other antenna or transmitter.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>