Sensata HUBA Wireless Gateway User Manual
- June 6, 2024
- Sensata
Table of Contents
HUBA Wireless Gateway
User Manual
The device under test is manufactured by the grantee (Sensata Technologies) and sold as an aftermarket product. Per 47 CFR 2.909, 2.927, 2.931, 2.1033, 15.15(b) etc…, the grantee must ensure the end-user has all applicable/appropriate operating instructions. When end-user instructions are required, as in the case of this product, the grantee must notify the end- user.
Sensata Technologies will include the contents of this document in the end user’s manual for the commercial product.
INFORMATION TO BE INCLUDED IN THE END USER’S MANUAL
The following information (in blue) must be included in the end product user’s manual to ensure continued FCC and Industry Canada regulatory compliance. The ID numbers must be included in the manual if the device label is not readily accessible to the end-user. The compliance paragraphs below must be included in the user’s manual.
FCC ID: 2ATIMHUBA
IC: 25094-HUBA
This device complies with Part 15 of the FCC Rules and with Licence exempt RSS
standards of Industry Canada.
Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Exposure to radiofrequency energy. The radiated output power of this device meets the limits of FCC/ISED Canada radio frequency exposure limits. This device should be operated with a minimum separation distance of 20 cm (8 inches) between the equipment and a person’s body.
WARNING: Changes or modifications not expressively approved by the party responsible for compliance could void the user’s authority to operate the equipment. The term “IC:” before the radio certification number only signifies that Industry Canada technical specifications were met.