Shenzhen Sound Butler Technology T3 True Wireless Headset Instruction Manual
- June 6, 2024
- Shenzhen Sound Butler Technology
Table of Contents
Shenzhen Sound Butler Technology T3 True Wireless Headset
Product overview
True wireless headset new experience, using fingerprint touch, LED digital display, support BT 5.2, true wireless, really. convenient
Parameter configuration
True HIFI sound. wireless The left connection and right (TWS) ears to have achieved full wireless. stereo, capability left and can right be the channel used alone separation, or in pairs.
- Wireless version BT5.1
- Support protocol HSP/HFP/A2DP/AVRCP/SPP
- Button Rngerprinttouch
- Frequency response range 40Hz-20KHz
- Communication distance about 10 meters
- Product size 82mm53.3mm33.SMM
- Product weight 70g
- Battery life 3-4 hours (default boot volume)
- Charging time 3hour
- Sensitivity 106dBSPL±3dB
- Packing list Earphone 2, charging bin l charging cable *1, instruction manual
wireless pairing
Take out the ed corresponding headset. off, when g headset press the headspring two
Wireless pairing akes out the headset. When the headset is turned on, tum on the wireless fun find the corresponding headset pairing action of the phone, name Cl, and click the pairing name to the headset is tur nectI f the ned off, long-press the two headset buttons for three seconds at the same time, pairing name Cl, and dick the pairing name to connect. After the first headset will be removed from the charging is successful the compartment When the phone is wireless enate headset bled, and the phone will be automatically paired.
Wireless use
Pairs of
TWS
Switch machine
5Acecoordidng ltoo tghe
| Pre song
hDeoumbalest-dericekarts
Accor Siri to the
ding o
| Next song Play/Pause
tDhoeuvbiclee-celaicrsk Click either side
Answer Refuse to listen to
Click on the Accoordidnsg ltoo tghe
---|---|---
s c n s| n| 3 secon s l n| 2 sec n| n
Tips:
In the order to avoid the headset automatically turning on the wireless connection, it is recommended that you turn off the Bluetooth device when not using the headset, so as to avoid wasting the power of the headset and the device
Key here is
- Charging mouth
- Fingerprint touch
- Dust-proof net
- MIC
- Charging module
PRECAUTIONS
- Do not treat this product violently, and do not squeeze ii with heavy objects, keep away from high temperature and high humidity environment.
- Keep away from WIFI and routers and other high-frequency transmitting equipment, which will affect the signal reception of this machine, resulting in sound card disconnection and disconnection.
- Please use this product in an effective environment (10 meters), and there should be no physical obstruction between the Bluetooth device and the headset (such as a wall, etc.)
- When the charging box cover is opened and then closed, the blue light at the bottom of the charging box flashes quickly. This is the display of the battery box’s no-power status. Al this lime, the automatic booting of both ears is invalid, and you need to manually press the button to start.
Note : This product can be used with any Bluetooth-enabled device.
FCC Warning Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The device has been evaluated to meet general RF exposure requirements.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>