CLIPLIGHT 170AIR Fresh Air Ozone Machine Instruction Manual

Table of Contents

CLIPLIGHT 170AIR Fresh Air Ozone Machine

Read and understand all instructions herein before operation. Not following instructions could lead to unforeseen accidents. Instructions can also be found at cliplight.com.
This equipment generates ozone, a strong oxidizing agent. Treatment areas should always be unoccupied.
Use in enclosed spaces only.
Exit area during treatment and remove any plants or animals.
Operate in absence of combustible dust or vapors (ex: sawdust or petroleum).
After treatment, ventilate area thoroughly before re- entering.
When unit is powered from a 12V adaptor, ensure that automotive battery is in good condition and is fully charged.
One hour of operation will deplete less than 2% of battery capacity.

Mobile application: Have vehicle parked with motor running. Set ventilation system to recirculation mode and fan speed to high.
Typical car treatment is 20-30 minutes. For more problematic odors or larger vehicles, additional treatment time will be required.
Stationary application: cover all vents and openings to help ensure ozone remains within enclosed space. If a fan is available to circulate air, operate at full speed.
Typical room treatment time depends on contamination level and size of room. A minimum of 1 hour is recommended.

AC adaptor or 12V adaptor.
When using AC adaptor for a vehicle, leave window slightly ajar and pass cable through.

Select treatment time on LCD screen using ⇑ and ⇓ buttons.
Timer sets in 10 minute intervals up to 90 minutes, followed by 30 minute intervals up to a maximum treatment time of 10 hours.
Once treatment time has been selected, press the button to start unit.
Green LED light will turn on – leave treatment area.

Please contact local supplier or Cliplight Manufacturing Co. for your nearest outlet.
UV bulb: 410212
AC adaptor — available for 110-240V: 410211
12V adaptor: UVEC 07-G

This product is warranted for 12 months from the date of purchase against all manufacturing defects. Cliplight Manufacturing Co. reserves the right to replace or repair faulty units.
Warranty does not cover the failure of products damaged by abuse, misuse, or improper application.
Warranty does not cover bulbs or wire cords.

The bulb contains a minute quantity of mercury. Recycle bulb in accordance with local regulations and facilities available.

Read User Manual Online (PDF format)