PROSONiC BT3 Portable Wireless Bluetooth Speaker with 10W Stereo Sound and Bass Boost Instruction Manual

June 6, 2024
PROSONiC

Model: BT3
Instruction manual

LOCATION OF CONTROLS

1. MICROPHONE
2. BLUETOOTH/AUX 8. INDICATOR,
3. BASS BOOST INDICATOR
4, TWS BUTTON
5. BASS BOOST BUTTON
6. VOL-/ BUTTON| 7. VOL+/ BUTTON
8. PLAY/PAUSE BUTTON
9. POWER BUTTON
10. AUX-IN JACK
11. BATTERY INDICATOR
12. USB-C 5V IN
13. RUBBER FLAP
---|---

GETTING STARTED

Charge the battery
Before using the speaker, you must charge the battery. Connect the USB-C cable (included) to the USB-C 5V  IN of the speaker firmly, and plug it into a USB power. The BATTERY INDICATOR turns solid red. After the battery has been fully charged, the light switches off.

Power source
Press and hold the POWER BUTTON to turn on the speaker. Press and hold the POWER BUTTON again to turn off the speaker.

Auto standby function
If there is no operation on the speaker for about 15, minutes, it turns off automatically.

BLUETOOTH FUNCTION

Pair the Bluetooth device
Before using your speaker with a Bluetooth device for the first time, you must pair and connect it to the Bluetooth device. Press and hold the POWER BUTTON to turn on the speaker until you hear the voice guidance. The BLUETOOTH/AUX INDICATOR starts to flash blue light, and the speaker is now in pairing mode.

  1. Verify that the Bluetooth function of Bluetooth device is enabled.
  2. Choose the Bluetooth menu in your Bluetooth device, and from the found devices, select the “Prosonic BT3”. If you are prompted to enter the PIN code, please enter “0000” (four zeros)
  3. For more information, see the user manual of Bluetooth devices.
  4. After a successful pairing, the BLUETOOTH/AUX INDICATOR turns solid blue.
  5. Play the music from the Bluetooth device.

Note:

  1. Press and hold the PLAY/PAUSE BUTTON until you hear the voice guidance to terminate the Bluetooth function. Press and hold the  LAY/PAUSE BUTTON again to activate the Bluetooth function.
  2. When you turn off/on the speaker or the Bluetooth device, the speaker will connect to the last Bluetooth device it was used with automatically within 10 seconds. Otherwise, you need to connect it manually on the Bluetooth menu in your Bluetooth device.
  3. Depending on the device manufacturer, some Bluetooth devices need to perform the pairing again. |

AUX IN FUNCTION

  1. Connect an audio cable {included} to the AUX IN JACK of the speaker until you hear the voice guidance. The BLUETOOTH/AUX  INDICATOR turns Solid green.
  2. Connect the other end of the audio cable to the audio output socket on the external audio devices such as MP3 players, Discman, etc.
  3. Play from an external audio device.

Note: If the audio cable is already connected to the speaker, you have to remove the audio cable from the speaker in order to select the Bluetooth function.

MUSIC CONTROLS AND BASS BOOST EFFECT

Music controls

  1. While the Bluetooth playback is in progress, press the PLAY/PAUSE BUTTON to pause the Bluetooth playback. To restart the Bluetooth playback, press the button once again.
  2. Press the VOL+/ BUTTON to skip to the next track.
  3. Press the VOL-/ BUTTON to return to the previous track,

To adjsut the volume

  1. Press and hold the VOL+/ BUTTON to increase the volume of the speaker
  2. Press and hold the VOL-/ BUTTON to decrease the volume of the speaker.

Bass boost effect

  1. Press the BASS BOOST BUTTON to enjoy the bass boost effect. The BASS BOOST INDICATOR turns solid white.
  2. Press the BASS BOOST BUTTON again to switch off the bass boost effect. The light switches off

MANAGE YOUR CALLS |

  1. Press the PLAY/PAUSE BUTTON to answer an incoming call or to end a call.
  2. Press and hold the PLAY/PAUSE BUTTON to reject an incoming call. Bwsmoe  TWS is the true wireless stereo which means two Bluetooth speakers are able to be paired to play music simultaneously to provide enhanced stereo sound. If you have two speakers, you can enjoy this feature. Enabling

TWS mode

  1. Turn on both speakers and confirm they are disconnected to any Bluetooth device.
  2. Press the TWS BUTTON either one of the speakers until you hear a voice guidance and shortly after, your speakers are connected in TWS  ode.
  3. After connecting successfully, the speaker with flashing blue BLUETOOTH/AUX INDICATOR will serve as the left speaker. The speaker with solid blue BLUETOOTH/AUX INDICATOR will serve as right speaker.
  4. Pair and connect the left speaker with your Bluetooth device. After a successful pairing, play the music from the Bluetooth device to enjoy enhanced stereo sound.

Disabling TWS mode

  1. Press and hold the TWS BUTTON either one of the speakers for 5 seconds.
  2. The right speaker is disconnected from the TWS  mode, and is ready for pairing to another Bluetooth device.

Note:

  1. To enable the TWS mode again. You have to turn both speakers off. Then turn both speakers on and they will automatically to connect to each other again.
  2. Both speakers are up to 60 feet apart. Make sure that there is no obstruction between the speakers.

WATERPROOF PERFORMANCE OF THE SPEAKER

  1. Waterproof performance of the speaker has a waterproof specification of IPX5. It can resist gentle water spray & splash but cannot be partially or fully submerged or left in a wet environment for an extended period of time, and of which could cause unrepairable damage to the speaker.
  2. The rubber flap plays a very important role in maintenance of the waterproof performance. When using the speaker, make sure that the rubber flap is
    closed completely. When closing the rubber flap, be careful not to allow foreign objects inside. If the rubber flap is not closed completely the waterproof performance may deteriorate and may cause a malfunction of the speaker as a result of water entering the speaker.

SPECIFICATIONS

  • Power Output: 2 x 5W RMS
  • Connectivity: 3.5mm AUX-IN Jack USB-C 5V in
  • Power Requirement: USB Power Input 5V/1A Rechargeable Battery
  • Unit Dimensions (W x H x D) 57” x 28” x 29.5” (145mm x 71mm x 75mm)
  • Unit Weight: 0.71Lbs (3229)
  • Specifications and features are subject to change without prior notice. *

USER SAFETY GUIDE

IMPORTANT-SAFEFYINST RUCFIONS
CAUTION: Do not remove cover (or back). Non-user-serviceable parts inside. Refer servicing to a service professional.

INSTRUCTIONS ON ENVIRONMENT PROTECTION

Do not dispose of this product in the usual d household garbage at the end of its life cycle; jus bring it to a collection point for the recycling of electrical and electronic appliances. This symbol on the product means the instructions for use or the packing will inform about the methods for disposal. The materials are recyclable as mentioned in its marking. By recycling, material recycling, or ozher forms of re-utilization of old appliances, you make an important contribution to protect the environment. Please inquire at your local community administration for the authorized disposal location.

IMPORTANT SAFETY PRECAUTIONS

  1. READ INSTRUCTIONS – All safety and operating instructions should be read before the appliance is operated.
  2. RETAIN INSTRUCTIONS – The safety and operating instructions should be retained in a secure place for future reference.
  3. FOLLOW INSTRUCTIONS – All operating and use instructions should be followed.
  4. HEAT – The appliance should be situated away from heat sources such as radiators, heat registers, stoves, or other appliances (including amplifiers) that produce heat.
  5. POWER SOURCES – The appliance should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance.
  6. CLEANING – The appliance should be cleaned only as recommended by the manufacturer.
  7. SERVICING – The user should not attempt to service the appliance beyond that described in the user’s operating instructions. All other servicing should be referred to qualified service professional.

FCC Caution

This device complies with part 15 of the FCC  Rules. Operation is subject to the following Cc two conditions:

  1. This device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These  limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur ina particular installation. If this equipment does cause harmful  interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

BASIC WARRANTY STATEMENT

! We warrant the product to the original purchaser ONLY, to be free from defects in materials and workmanship under normal use for ONE Year  from date of the original purchase. We agree, at our option, under the warranty period, to replace the product if it is determined to be defective at no charge. This limited warranty does not cover any loss or damages that occur as a result of:

  • Cosmetic damage. Shipping or improper installation or maintenance.
  • Misuse.
  • Neglect.
  • Any cause other than ordinary commercial or industrial application.
  • Adjustment by non-authorized source or any of the products firmware or hardware that you or any third party have modified or altered Improper environment
  • Excessive or inadequate heating or air conditioning or electrical power failures, surges, connection to improper voltage supply or settings or other irregularities.
  • Accidents, acts of God.

In Canada & the United States, please contact your dealer or our customer service at email: Singingwoodaudio@gmail.com
*Please note that in order to have your merchandise repaired and replaced by warranty, you must contact our customer service representatives by  phone or email, and get RMA number To obtain factory service, the original purchaser MUST present the following:

  1. A sales recipt/proof of purchase indicating cate of purchase.
  2. Your Name, Place of Purchase, Address, Unitodel, and Description of Problem.
  3. Send the unit pre-paid to the address below in the Original packaging or reasonable substitute to prevent damage. No return will be shipped back to aPO BOX.
  4. All of the accessories that came with the product package must be sent along with the main unit.
  5. Please include your check or money order in the amount of $15.00, payable to Leaderwave USA LLC. to cover handling and return shipping charges. We will not be responsible for delays or unprocessed claims resulting from a purchaser’ failure to provide any or all of the necessary information. Send all inquiries or return to:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals