EFengL S300 3-in-1 Wireless Charging Station User Manual
- June 6, 2024
- EFengL
Table of Contents
EFengL S300 3-in-1 Wireless Charging Station
Preface
Dear users, thank you for purchasing this product . In order to further understand the product, please read this manual carefully before use.Wish you a pleasant experience.
Product Details
Charging stand
- Wireless charing area for mobile phone
- Indicator lamp
- Magnetic charging area for Apple watch
- USB-C interface
- TWS headset charging area
Using instructions
- Power connected ,the device enters the standby state;
- Place the Apple Watch in the Magetic charging area to conduct wireless charging;
- Put the mobile phone that supports wireless charging on the corresponding charging area for wireless charging.
- Put the TWS headset that supports wireless charging on the corresponding charging area for wireless charging.
Indicator light description
- When power connected , the blue indicator lights up for 2 seconds and then off and enters the standby state;
- When charging the device, the indicator light will be on for 10 seconds and then turn off and enter the charging state;
- When three devices, mobile phone, watch and earphone, are placed to charge successively, the indicator light shall be timed according to the last device connected to charge, and will be extinguished after 10 seconds;
- When the device is fully charged, the indicator light is off;
- When the wireless charging output is abnormal or a foreign body is detected, the blue indicator light will continue to blink;
How to solve abnormal charging
- Please confirm whether your mobile phone has wireless charging function before use;
- Check whether the phone deviates from the wireless inductive charging area of the charger;
- Whether a non-metallic protective case is used for charging mobile phones, and the thickness of the protective case is recommended not to exceed 4mm;
- When metal objects touch the charging area, the charger will automatically identify and provide power off protection.
- When the temperature of the charger is too high, it will automatically start the protection.Please unplug the power supply first and use it after the charger recovers the temperature.
Q&A
Q: Why is there heating in the charging of wireless charging inductive
products?
A :During the charging process, there will be a certain loss
ofmagnetoelectric conversion, which will be converted into heat, causing the
mobile phone and charger to generate heat, which is a normal phenomenon.
Suggestions:
- When the device is fully charged, disconnect it from charging in time to avoid a long cycle of charging, which may lead to continuous heating of the device and charger;
- It is recommended to stop running the background software when charging the phone.
Safety Notes
- Use indoor or under dry environment, avoid placing or using in the environment of high temperature, humidity, strong static electricity and strong magnetic field;
- For your safety, please do not use wet hand plug and unplug electrical appliances; · Avoid putting it in a place easily accessible to infants and children;
- Do not use the product if it is contaminated with water or dirt;
- Non-professional personnel are not allowed to open and repair without authorization.
Specifications
- Interface: USB-C
- Input: 9V=2A 12V=2A
- Watch magnetic charging output: 3W
- Mobile phone magnetic charging output 10W Max
- TWS headset charging output: SW Max
- Material: Zinc alloy+ plastic
- Size: 82150158 mm
Package Contents
- Wireless Charging stand x1
- TYPE-C Charging Cable x1
- User Manual x1
FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Any changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonabl protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF warning for WPT device:
The equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. During the operation of device a distance of 15cm
surrounding the device and 20 cm above the
top surface of the device must be respected.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>