RUN BISON HT-STRIP-4FT 4 ft. Integrated LED Dimmable LED Shop Light Instruction Manual

June 6, 2024
RUN BISON

INSTALLATION INSTRUCTION

Installation Step:
Surface Mounting
Step1: Secure the provided brackets onto the ceiling by buying the provided accessories and screws.
Step2: Screw the covers at the outlet of the back of the housing. (Figure b)
Step3: Wire to main power through the junction box (figure c)
Step4: Then clip the brackets to the slots of the fixture(figure d)

Field-Adjustable Wattage & CCT

The end users may adjust the color temperature and lumen output respectively by the two DIP switch buttons integrated into the driver. Each DIP switch is accommodated with 3 options (left, middle, and right ), corresponding to 3 color temperatures and 3 powers respectively, which can perform the desired color temperature and lumen output combination.
Factory Settings: 34W,3500K

  1. DIP switches are located on the side of the fixture. (see Fig. e)
  2. Select a wattage and color temperature by sliding the switch left or right respectively to the desired value. (see Fig. e)

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals