Altelix NHPW-AV1 Wall Mountable Universal Mounting System Installation Guide

October 27, 2023
ALTELIX

Altelix NHPW-AV1 Wall Mountable Universal Mounting
logo

Altelix NHPW-AV1 Wall Mountable Universal Mounting System

Altelix NHPW-AV1 Wall Mountable Universal Mounting
product

Install Brackets

The Altelix NHPW-AV1 Wall Mountable Universal Mounting System consists of three adjustable brackets used for securing the equipment to the aluminum equipment mounting plate. The brackets can be adjusted for width, length and height.Altelix NHPW-AV1 Wall Mountable Universal Mounting
02The aluminum equipment mounting plate includes four (4) stainless steeling mounting feet so that the plate can be directly attached to a metal bulkhead or to a wall using the anchors provided.
The NHPW-AV1 includes the following components:

  • (2) Width and Height Adjustment Brackets
  • (1) Length Adjustment Bracket
  • (7) Bracket Mounting Screws
  • (4) Mounting Feet and Hardware
  1. To determine the location of the (3) equipment mounting brackets, position the device to be mounted onto the equipment mounting plate. Position it within the mounting hole locations for the brackets as indicated below. Be sure to orientate your equipment so that any connections or ports are easily accessible.
    Equipment Mounting Plate
    Altelix NHPW-AV1 Wall Mountable Universal Mounting 04
    Altelix NHPW-AV1 Wall Mountable Universal Mounting 05
Width Min. Width Max. Height Min. Height Max.
3.0 in. (76.2mm) 11.5” (292.1mm) 0.5 in. (12.7mm) **3.5

in.** (88.9mm)

The above illustration and chart shows the minimum and maximum width and height of devices that can be mounted to the NHPW-AV1.

  1. Once the location of the (3) equipment mounting brackets are determined, secure each to the equipment mounting plate using the supplied screws.
  2.  Attach the (4) mounting feet to the plate using the hardware provided.Altelix NHPW-AV1 Wall Mountable Universal Mounting 06
  3.  Mount the equipment plate in the required location. For drywall applications, (4) wall anchors are provided in the kit.
  4. To secure the device to the equipment plate, move the two height adjustment brackets into place and secure with the (2) screws on bracket. Ensure height adjustment screws are tight.Altelix NHPW-AV1 Wall Mountable Universal Mounting 01

Installation Note: The steps 4 and 5 may be reversed depending on the size and weight of the equipment being installed.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals