Shenzhen Wenenlighting WE-M06-D Smart Scene Music Lamps Instructions
- June 6, 2024
- Shenzhen Wenenlighting
Table of Contents
Shenzhen Wenenlighting WE-M06-D Smart Scene Music Lamps Instructions
Installation Instructions
Basic parameters:
- Control method: mobile APP/Controller
- Working temperature: -20 degrees-+60 degrees
- Power: 2.2W/PC
- Power supply voltage: 5V (USB)
Cautions:
- The maximum load of a single USB power cable is IOPCS hexagonal lights. Hexagonal lights exceeding the number will not work. If you need to connect more hexagonal lights, you have to add more USB power cables.
- The hexagonal lights are cascaded in the direction of the arrow through the connector.
Applicable places: study rooms, living rooms, bedrooms, gyms, music bars, coffee shops and other home and commercial places.
Product Description
Bluetooth Symphony Controller
- Support system : Android 4.4 and above / i0S 11.0 and above
- Connection mode : Bluetooth 4.0
Product characteristics
Download App Software
Please search LED LAMP in major Appcenters, or scan below QR code.
- Download the “LED LAMP” APP with your mobile phones by scanning the QR code on user manual or search the “LED LAMP” APP in iPhone APP store or Google play store.
- After the APP are downloaded successfully, you need to turn on Bluetooth function on your phone firstly, then plug in the strip light, then open the APP, your APP will pair with the strip light automatically and you can control it.
Android phones need to open the location function and allow permission
Unable to Connect Troubleshooting
- Check if the power supply of the light strip is normal.
- Check if the Bluetooth is turn on.
- Check if there are other mobile phone are connected, Bluetooth 4.0 only support connections one to many, dose not support many to many.
- Check APP Bluetooth setting if the phone is connected to the device, if connect, exit the APP and reopen, the APP will go to connect automatically.
- Normal operations and can not connect, please exit the APP and reopen.
- Exit APP, restart mobile phone, power on the strip light, reopen the APP, then them will connect automatically.
Instructions
Open the app, click the icon: LED DMX, and then enter the Bluetooth control interface.
Adjust pixels
The default factory pixel count of the APP is 130, i.e. 10 PCS hexagon lights,
the part beyond that will not work. When the number of pixels does not match
the number of hexagon lights you have connected, you need to change the number
of pixels, and the number of pixels should be increased by 13 for each
additional PCS hexagon light.
FCC Warning Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following
two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that
may cause undesired operation.
RF Exposure Statement
To maintain compliance with FCC’s RF Exposure guidelines, This equipment
should be installed and operated with minimum distance of 20cm the radiator
your body. This device and its antenna(s) must not be co-located or operation
in conjunction with any other antenna or transmitter.
Read More About This Manual & Download PDF:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>