BESTISAN SR04 Bookshelf Speaker User Guide

Quick Start
(SR04)

Please read all instructions before use for the best performance of this product. Save these instructions for future reference.

Box Contents

LED Indicators and Button Introduction

01. Power switch
02. Input selection
Press in to navigate between audio sources:
Bluetooth -> Optical -> Coaxial -> LINE IN
-> USB
03. Sound effects
Press in to navigate between audio sources:
Music -> Dialogue -> Movie
04. Volume control| 05. Treble control
06. Bass control
07. Optical input port
08. Coaxial input port
09. Line in the input port
10. USB input port
11. Left speaker audio output
12. Power port
13. Left speaker audio in
---|---

Know Your Remote

| Power button| | Music mode
---|---|---|---
Volume up| Line mode
Previous track| Bluetooth mode
Play/pause| Optical mode
Coaxial mode| Next track
USB mode| Volume down
Movie mode| Mute/Unmute
Dialogue mode|

Connection Diagram

a Coaxial cable (not supplied)
b Digital Optical cable (supplied)
c USB (not supplied)
d Bluetooth| e Stereo RCA to 3.5mm audio cable (supplied)
f RCA to RCA audio cable (supplied)
g Power Adapter (supplied)
---|---

Connecting with a TV

Active Speaker

A Method 1. Connecting using an Optical cable. Select Optical mode and set the TV’s audio output to “PCM”.
(More information on the PCM page)
B Method 2. Connecting using an RCA to 3.5mm audio cable.
Select RCA mode.
C Method 3. Connecting using a Coaxial cable. Select Coaxial mode and set the TV’s audio output to “PCM”.
(More information on the PCM page)

Setting “PCM” on your TV

When all cables are connected properly, an LED indicator lights properly, if there is no sound from the tv or Soundbar, please set your tv as below:

1. Press “Menu” on the TV’s remote control.
2. Press the arrow keys on the remote to scroll to “Audio Settings.”
3. Press “OK” on the remote control.
4. Scroll to “Advanced Audio” and press “OK”. Some televisions may not have an”Advanced Audio” menu and may list various audio settings instead.
5. Scroll to “Audio Output Mode” or “Digital Audio Output Mode” and press “OK”.
6. Scroll until “PCM” is displayed as the current audio output.
7. Press “OK” to save the settings.

Connecting a Bluetooth Device

a. Press the “ BT ” button on the remote or press the “ ” button on the back panel of the active speaker, the LED indicator blinks blue.
b. Turn on Bluetooth on the Bluetooth device.
c. Select “ BESTISAN SR04 ” and connect it. When your Bluetooth device is connected, the LED indicator blinks blue slowly.
d. Play music files from the device, connected via Bluetooth, through the bookshelf speaker.

Specifications

Coaxial: R/L: 500±50mV
OPT: R/L: 500±50mFFS
Bluetooth: R/L: 700±50mFFS
Frequency response:| 40HZ-18KHZ
Bass unit:| 4 inch (116mm)
Tweeter unit:| Φ13mm silk dome tweeter

Troubleshooting

No sound

• Check if the power indicator light is ON.
• Try to turn up the volume using either the master volume control or remote control.
• Ensure the audio cables are firmly connected and the input is set correctly on the

speakers.

• Check if there is a signal output from the audio source.
• Cannot connect via Bluetooth
• Make sure the speaker is switched to Bluetooth input, in other audio input mode
• Bluetooth can not be paired or connected. Disconnect from any Bluetooth device by pressing and holding the volume dial in Bluetooth mode, then try again.
• The effective Bluetooth transmission range is 10 meters, please make sure operation is within the range.
• Try another Bluetooth device for connection.

The SR04 Bookshelf Speaker does not turn on

• Check if mains power is connected. or if the wall outlet is switched on.

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•  Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body.

Best Artisan Corp.
801 DUPONT AVE SUITE F & G, ONTARIO, CA, 91761.
[email protected]
Thanks for reading!

Documents / Resources

| BESTISAN SR04 Bookshelf Speaker [pdf] User Guide
SR04, 2A5SW-SR04, 2A5SWSR04, SR04 Bookshelf Speaker, Bookshelf Speaker
---|---

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>