ALORAIR Pure Airo Hepa Pro 770 Air Scrubber Owner’s Manual

: June 6, 2024
: Alorair

Table of Contents

INTRODUCTION
KEY FEATURES
INSTRUCTIONS
CHANGING THE FILTERS
SAFETY NOTES
LIMITED WARRANTY
Documents / Resources
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)

Restoration &Moisture&Ventilation
PureAiro HEPA Pro 770
Owner’s Manual

READ AND SAVE THESE INSTRUCTIONS
AlorAir Solutions INC.
Add: 2048 E. Francis St Ontario CA 91761
Tel:888-990-7469
E-mail:[email protected]

WARNING!
Please note that the PureAiro HEPA Pro 770 should only be used with parts approved by AlorAir. The use of unauthorized parts or alterations to the machine could void your warranty. Contact an approved distributor for further assistance.
To Avoid the Risk of Fire or Electric Shock:

Unit must be electrically grounded.
Insert 3-prong plug directly into an outlet with Ground Fault Circuit Interrupting device.
Do not use an adapter with this unit.
Do not use the unit in standing water.
If electrical parts get wet, they must be dried prior to use.

INTRODUCTION

The PureAiro HEPA Pro 770 is a convenient filtration system that cleans the air. The PureAiro HEPA Pro 770 uses an effective blend of airflow and advanced filtration to expel airborne particles like mold spores, dust, pollen, and pet dander. The PureAiro HEPA Pro 770 is ideal for restoration jobs, including water, sewage, and fire.

IDENTIFICATION

Congratulations on purchasing a PureAiro HEPA Pro 770 air scrubber. In order to take advantage of the warranty plan, be sure to note the serial number and date of purchase. Serial Number:…………
Date of Purchase:…………

HOW IT WORKS
When set to maximum airflow, the scrubber draws air through two types of filters- a pre-filter and a HEPA/Activated Carbon Filter.

Pre-Filter
The first phase of filtration, the prefilter, Captures initial dust and allergen particles.
HEPA/Activated Carbon Filter
The second phase of filtration, the HEPA/Activated Carbon Filter, catches smaller particles, down to 0.3 microns. Contributes to the control and prevention of the growth of bacteria, germs, and mold. Captures 99.99% of dust and allergens.

SPECIAL FEATURES
Daisy-Chain Capability
(Note: It is not available for 220/240)
Using the auxiliary outlet on the control panel, you can link up to 3 units together. You can also daisy-chain the machines when they are stacked vertically (limit of 2 units).
Multi-Positional
The PureAiro HEPA Pro 770 can be operated in the vertical position, as well as when stacked vertically (up to 2 units). When storing, the machines can be stacked horizontally to save space.

Removable Intake Panel
The PureAiro HEPA Pro 770 is equipped with a removable panel on the intake side of the machine. The removable panel is quite useful in remediation applications, so you can draw air out of the room and create more negative pressure (use a manometer to monitor air pressure). To use panel:

Remove the panel.
Install the machine outside the containment area to draw air out.
Cut a hole in the containment plastic that is the size of the unit’s inlet.
Insert the inlet into plastic and seal the circumference tightly with duct tape.

KEY FEATURES

|
---|---

INSTRUCTIONS

SETUP

Place the PureAiro HEPA Pro 770 so that it is in the upright, vertical position.
Plug the machine into a standard 115-volt outlet. Note: Each unit needs 3 amps to operate.
The PureAiro HEPA Pro 770 can be operated in a vertical or horizontal position, depending on the exact situation. At this point, adjust the machine to the optimal position.

THE CONTROL PANEL
Variable Speed Control The Variable Speed Control is used to adjust the power of the machine. Turn the knob in a clockwise direction, to increase the speed from maximum to minimum. The minimum speed setting is located immediately under the OFF button.
Auxiliary Outlet
(Note: It is not available for 220/240)
If more air filtration is necessary for a space, you can”daisy chain” or link up to 3 PureAiro HEPA Pro 870s to the same outlet. There is a maximum amperage of 12 when the units are turned off, and a maximum of 9 amps when the units are turned on. Other equipment can be plugged into the same outlet as the PureAiro HEPA Pro 770 as long as it doesn’t go above the max amperage.
Circuit Breaker Switch
The Circuit Breaker Switch protects the unit if there are more than 12 amps of electricity passing the circuit. If this occurs, the switch will cut off the power to the unit.
Timer
Used to time the running time of the device. Start timing when the device is running, and pause timing when the device is stopped.

CHANGING THE FILTERS

Loosen the 4 locks that hold the filter board in place.
Slide-out the filter panel board.
Remove the used filters and replace them with new filters.

WARNING

Always wear approved protective gear when changing the filters.
Filters should be changed after each remediation job.
If the indicator light is on, always change the HEPA/Activated Carbon Filter.

APPLICATIONS
Water Damage
In this application, the PureAiro HEPA Pro 770 should be placed in the center of the affected area. The air scrubber will draw in the air, filter it, then blow out the newly cleaned air. To begin the process, simply turn on the scrubber and it will start cleaning the air. Keep in mind that if you are working in a large area or one divided by walls, you may need several air scrubbers to effectively clean the air.
Odor Control
The PureAiro HEPA Pro 770, when used with the HEPA/Activated Carbon Filter, is excellent at odor control, as well. Simply place the carbon filter in the pre- filter slot and it will capture a wide variety of odor-causing gas molecules, such as volatile organic compounds (VOC’s), smoke, soot, and paint fumes.

Other Uses
The PureAiro HEPA Pro 770 is also useful in many other applications including mold remediation, fire damage, dust control, and sewage remediation.
WARNING!
Breathing Hazard

When using the PureAiro HEPA Pro 770 in a containment area, always turn off power to open combustion appliances, such as fireplaces, furnaces, water heaters, and HVAC systems, to avoid the risk of backdrafting carbon monoxide fumes.
If the Filter Change Light illuminates during the remediation process, immediately change the HEPA/Activated Carbon Filter.

Tipping Hazard

Use caution when stacking units.
Do not stack more than 2 units on top of each other.
Falling equipment could cause bodily harm.

SAFETY NOTES

Always unplug the unit prior to performing any maintenance.
Check the power cord for damage (fraying, cuts, etc.) before use.
Verify that the GFCI outlet is working by powering on the machine and pressing the red GFCI test button. If the outlet is working, the”reset” button will pop up. To operate, press the reset button again.
To avoid electric shock, never use a water hose or pressure washer to clean the electrical components.
Check the pre-filter prior to operating the machine to ensure it is not clogged. If there is any sign of airflow restriction change the filter.
Make sure the unit is dry prior to installing clean filters.
When using the PureAiro HEPA Pro 770 for remediation purposes, replace both filters at the same time and always clean the machine in between jobs. This will help prevent cross-contamination.

LIMITED WARRANTY

10 YEARS (FROM DATE OF PURCHASE) : AlorAir warrants the air scrubber to be free of defects in the polyethylene body. At its discretion, AlorAir will repair or replace the unit body, free of charge. (excluding transportation costs).
1 YEAR (FROM DATE OF PURCHASE) : AlorAir warrants the unit’s parts will operate free of defects in material or workmanship. This includes factory laborers. At its discretion, AlorAir will replace defective parts, including factory labor. This does not include transportation costs. The limited warranty is applicable to the original purchaser only, from the date of purchase. It should be subject to the terms and conditions listed in this limited warranty file.
Customers Responsibility:

Customer must provide normal care and maintenance.
Removal and re-installation of the unit are the sole responsibility of the owner.
If the customer cannot return the unit to the certified repair center, all costs associated with freight shipment are borne by the customer. In addition, all duties related to freight shipments, including but not limited to palletizing, wrapping, and labeling. and pickup is associated with the customer.
If shipped, the customer is responsible for all risks of loss or damage.

AllerAir Warranty Steps:

Once goods are received, customers must log in to www.alorair.com to fill out the warranty registration form and submit it to AlorAir company. We will receive your purchasing and installation information and save it. If no warranty registration is sent to us, the warranty period will begin the day the shipment left the warehouse. Please be sure to record the serial # and date of installation. You will need this information to receive the RA number.
If warranty service is necessary, customers must contact AlorAir Tech Support at [email protected] or local technical service phone to receive a Return Authorization (RA number). Once an RA has been issued, customers should bring the unit to a certified repair center. AllerAir will arrange the shipping to bring the unit back to the AlorAir warehouse (at the expense of the customers) if customers are not available.
After the unit has been received by AlorAir (whether at a repair center or the warehouse), AlorAir will have an initial inspection. If it is determined to be an invalid warranty claim (see exclusions below), customers have to pay for all associated repair costs and shipping costs for units repair.
Customers can pick up the unit after repair at their own expense for shipping. Units will have rigorous testing before sending it back to customers
If the unit can no longer be fixed, and it is in the warranty period and determined to be a valid claim, we will ship the customer a new unit within the same year warranty from the date of replacement.
After parts are repaired or replaced by AlorAir, the original warranty period continues to apply until it meets its deadline. No extensions to the original warranty period.

Warranty Exclusions:
DAMAGE DUE TO THE FOLLOWING IS NOT covered under warranty

Acts of Nature- including but not limited to
Flooding
Fire
Water damage
Hurricane/storm damage
IMPROPER USAGE- Including but not limited to Misuse, abuse, or tampering whether intentional or accidental Improper installation or design Improper voltage Lack of normal care Failure to follow instructions
Corrosion
Freezing
Any additional costs due to changes in laws or building codes
Freight charges
Any costs due to lost profit or delay
Damage to property
Cause beyond control
Consumable parts, including but not limited to Filters Batteries Power cords Valves Switches Rubber parts
Direct, indirect, collateral, or inconsequential damages of any kind
THE WARRANTIES AND LIABILITIES SET FORTH ARE IN LIEU OF ALL OTHER WARRANTIES EXPRESSED OR IMPLIED, IN LAW OR IN FACT, INCLUDING IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. AlorAir’s total liability, regardless of the nature of the claim shall not exceed the original purchase price of the product. If a product or component is replaced while under warranty, the applicable warranty period shall not be extended beyond the original warranty time period. The foregoing shall constitute the total liability of the seller in the case of defective performance of all or any of the equipment or services provided to the Buyer. Buyer agrees to accept and hereby accepts the foregoing as the sole and exclusive remedy for any breach or alleged breach of warranty by Seller. Any dishonesty or fraud in connection with the AlorAir warranty thoroughly voids all warranty policies.AllerAir expressly reserves the right to pursue legal action in the event of dishonesty, fraud, or attempted fraud.