Shenzhen Fengruiyuan Technology YS098 Wireless Speaker User Guide

Shenzhen Fengruiyuan Technology YS098 Wireless Speaker

Features

• Bluetooth wireless 5.0: range 33 ft.
• Micro SD card port
• Digital volume control
• Voice prompts
• Built-in rechargeable battery: approximately 5 hrs of playtime at 50% volume
• Mlcro-USB port for battery recharge

Includes

• User’s Guide
• M icro-USS to USB charging cable

Controls

1. Mode: Press to change source modes to Bluetooth, Aux, FM, USB or Micro SD/ TF.
2. Play/Pair. Press to play/pause tracks. Press and hold to pair Bluetooth device manually.
3. Power: Press and hold to power ON/OFF.
4. Pairing/Source Indicator LED/Charging Indicator
5. Microphone
6. Volume/Skip/Prev: Press to raise or lower the volume. Press and hold to skip tracks.

Charging the Battery

To charge the internal battery, plug the USB charging cable into the DC Power Input on the speaker and a powered on computer or USB power adapter (not included) and standard power outlet. Charging time is approximately 2 hours.
When the battery is low a voice will announce “Low Battery,” then the unit will automatically power OFF.
While the unit is charging it will display a solid red light. When the battery is fully charged the light will turn off.

Aux in

Requires a 3.5mm audio cable (not included).

1. Connect a 3.5mm audio cable to the Aux In on the unit and the audio output/headphone jack on an audio device.
2. The speaker will automatically switch to Aux Mode.
3. Use the controls on the connected device to select and play audio. Be sure the volume on your connected device is audible when you begin playing.

USB &TF/Micro SD

1. Load a USB or a Micro SD memory card Into the appropriate media port.
2. The speaker will automatically switch to USB/SD mode.
3. Use the controls on your device to select and play audio from the connected drive.

Pairing & Playing Bluetooth Audio

1. When first powered on, the speaker defaults to Bluetooth Mode and Is ready to pair automatk ally. When pairing. remain within 3 feet of the Bluetooth device.
2. Using the controls on your Bluetooth devke, select 158 101 in the Bluetooth Settings to pair. rr need be, refer to the user’s manual for your specific devke tor more Information.
3.  When successfully paired, a voice will announce, bluetooth is connected.”Your Bluetooth device will now be heard through the speaker.
4. Use the controls on the connected Bluetooth device to select and play audio. Use the speaker controls or the connected Bluetooth devke to play. pause, and adjust the volume level.
5. After initial pairing. the speaker will automatkally connect to the last Bluetooth devke used whenever it is in Bluetooth Mode.
   Note: If your device should become unpaired or you find it is unable to connect. press and hold the Play/Pair bunon to enter to Pairing Mode. A voice will announce, “Bluetooth is connecting; and you can connect to the speaker manually.

FM Radio

An FM receiver is built into the speaker but functions best when the included USB cable is connected to the speaker. Adjust the position of the cable and the speaker to improve FM radio reception.

1. Once powered ON, press the Mode bunon to switch to FM Radio Mode.
2. Press and hold Play/Pair bunon to scan and save radio stations automatically.
3. Press and hold the +/- buttons to cycle through saved stations.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>