PM STUDIO PMP10072420 Azzaro Wireless Headphones User Manual

PM STUDIO PMP10072420 Azzaro Wireless Headphones

WHAT’S IN THE BOX

1. Azzaro Wireless Headphone
2. USB Charging Cable
3. Instruction Manual

WIRELESS HEADPHONE

1. Short Press: Volume Up
   • Long Press: Next Song
2. Short Press: Volume Down
   • Long Press: Previous Song
3. Short Press: Play/Pause Music or Answer/Hang Up Phone
   • Long Press: Turn headphones On/Off
4. Aux in
5. Indicator Light
6. Charging Port
7. Mic

PowerOn/Off
Long press #3 to turn On/Off.

MANAGING MUSIC/CALLS

• Play/Pause Music: short press #3
• Increase Volume: short press “+”
• Play Next Song: long press “+”
• To Answer/Reject Phone Call:short press #3 (on/off button) to answer/reject phonecall
• Decrease Volume: short press “-”
• Play Previous Song: long press “-”

PAIRING

• Step 1: Open the Bluetooth setting on your device and click “Search Device”. Some devices will search
  for available Bluetooth automatically.

• Step 2: Search for Bluetooth devices until you see “Azzaro headphone”. Select “Azzaro headphone” to pair the connection.

• Step 3: The indicator light on the headphones will flicker blue and red while pairing. Your device will indicate when the pairing is successful and the indicator light will stop flickering.

CHARGING

• Headphones should be fully charged before using.
• To charge the headphones insert one end of the provided USB cable into the charging socket on your headphones (#6 as shown above) and the other end into your computer or other 5V output charger.
• The indicator light will be red while charging and will turn off when fully charged.

TECHNICAL SPECIFICATIONS

• Bluetooth: V5.0
• Working distance: 10 meters
• Power Supply: DC5V 180 mA
• Battery: 3.7V, 200mAh
• Charging time: within 2 hours
• Operating time: up to 8 hours

TIPS

• When using for the first time, charging for more than 1-2 hours is recommended.
• Charge headphones if they have not been used for more than one month.
• Keep away from fire and water.
• To clean, use a soft cloth, if necessary dampened with a minimum amount of water and diluted mild soap.
• Do not use the headset while driving or cycling or in any situation where you should be able to hear other sounds. As a guide to setting the volume level, check that you can still hear your own voice when speaking normally while listening to the headphones.

FCC Rules

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions :

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

To prevent possible hearing damage, do not listen at high volume levels for long periods.

This marking indicates that this product should not be disposed with other household wastes throughout the EU.
To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling.

CAUTION
The danger of explosion if the battery is incorrectly replaced. Replace only with the same or equivalent type. The battery cannot be subjected to high or low extreme temperatures, low air pressure at high altitudes during use, storage or transportation. Replacement of a battery with an incorrect type can result in an explosion or the leakage of flammable liquid or gas. Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion. Leaving a battery in an extremely high temperature surrounding environment can result in an explosion or the leakage of flammable liquid or gas. A battery is subjected to the extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas. This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
• FCC ID : 2AX9X-PMP10072420
• IC : 26722-PMP10072420

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>