soundsoul DD013 Bluetooth Headset User Manual
- June 5, 2024
- SoundSOUL
Table of Contents
USER MANUAL
Pairing
- The earbuds automatically pair with each other after being taken out from the charging case. The LED on the main earbud flashes in white and red, and the LED on the secondary earbud stays in white.
- Activate Bluetooth on the device, and choose “SOUNDPEATS H1” on the Bluetooth list to pair.
Reset
- Clear pairing record between the earbuds and your devices.
- Place back both earbuds into the charging case and make sure they are in charging status.
- Long press both multifunction buttons for 10s until LEDs indicators of earbuds flash in white twice, reset completed.
Wearing
Product Diagram
Button Control
| Function | Operation |
|---|---|
| Power Cn | Automatically: Take out the earbuds horn charging case Manually: |
Long press the multifunction button for 1.5s
Power Off| Automatically: Place the earbuds back into the charging docks
Manually: Long press the multifunction button for Los
Pay/ Poise| Manually: Double click the multifunction button on right earbud
Maine –| Click the left multifunction button once
Maine «| Click the right multifunction button once
Previous Track| Long press the left multifunction button for 1.56
Next Track| Long press the right multifunction button for 1.56
Answer / Hong Up Phone Call| Double click the multifunction button on the
right earbud
Reject Phone Cal| Long press the multifunction button for 1.56
Switch Between Two Active Cots| Long press the multifunction button for 2s
Enter Poing Mode Mono*| Long press the multifunction button for 6s
Activate Voice Assistant| Triple tap the MFB
Game Mode| Double Click the multifunction button on the left earbud
Game Mode
SOUNDPEATS H1 uses the latest technology and is equipped with game mode. In the game mode， the earbuds’ delay will be greatly reduced to ensure the synchronization of the game audio and picture. Double-tap MFB on the left earbud to turn on/off the game mode. The earbud prompts “Game Mode” when the mode is on and prompts “Exit Game Mode” when it’s off.
Q&A
Q1: What do the charging LEDs tell while charging the case?
The LEDs indicators of the charging case stay on while charging, and turn off
after fully charged.
When the battery level of the charging case is 0-24%,
The first LED at the bottom flashes in white| When the battery level of the
charging case is 25%-49%,
The first LED at the bottom lights up in white And the second LED flashes in
white
---|---
When the battery level of the charging case is 50%-74%,
The first 2 LEDs at the bottom light up in white And the third LED flashes in
white| When the battery level of the charging case is 75%-99%,
The first 3 LEDs at the bottom light up in white And the fourth LED flashes in
white
When the battery level of the charging case is 100%,
All four LEDs at the bottom light up in white
Q2: Why are the earbuds still connected to my phone after placing them back?
- The charging case is out of battery. The case will not turn off the earbuds if the case battery is dead.
- Please make sure the earbuds are placed properly in the charging case. And wipe the charging metal sheet and pin needle with a microfiber cloth to keep the charging connectors on both the earbuds and charging case clean.
Q3: Why the playtime does not match as advertised?
A single charge of the earbuds will not give you 40 hours of playtime
constantly. The earbuds work around 10 hours per charge with average use. The
charging case provides another 3 recharges.
Qualcomm
Qualcomm aptX, Qualcomm TrueWireless, and Qualcomm cVc are products of
Qualcomm Technologies, Inc. and/or its subsidiaries.
Qualcomm and Qualcomm TrueWireless are trademarks of Qualcomm Incorporated,
registered in the United States and other countries.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference.
- this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
MANUFACTURER
Shenzhen SoundSOUL Information Technology Company Limited
Room 1308-1309, Building B, Huaihai Square, Chuangye Road,
Longhua District, Shenzhen, China. 518109
support@soundpeatsaudio.com
www.soundpeatsaudio.com