Thingsee Air Monitoring Room Temperature Humidity User Guide

Thingsee Air Monitoring Room Temperature Humidity

Product description

Thingsee AIR is a state of the art battery powered wireless IoT sensor for your indoor air quality monitoring. Together with CO2, TVOC, temperature, barometric pressure and humidity sensors, it is a perfect device to provide extensive overlook to both history and present air quality data. Thingsee AIR is part of Haltian Thingsee IoT solution and product family.

Product information

• Product name: Thingsee AIR
• Product description: Indoor AIR quality measurement
• Vendor name: Haltian Products Oy
• Product type: Wirepas sensor
• Internal Model Code (IMC prefix for TUID): TSAR01 / XXAR01

Sensor measurement specifications

CO₂

• Measure CO₂ levels indoors
• Measurement range 400 … 5000 ppm
• Accuracy is ±(30ppm +3% of reading)
• Automatic baseline calibration takes 8 days, and requires that the CO₂ level drops at least once per day
•  Possibility for manual baseline calibration
•  CO₂ sensor is a nondispersive infrared sensor (NDIR)

TVOC

• Total volatile organic compounds
• Resolution is 1ppb at range 0ppb-2008ppb
• Resolution is 6ppb at range 2008ppb – 11110ppb
• Resolution is 32 ppb at range 11110ppb – 60000ppb
•  Automatic baseline calibration takes 24 hours.

Temperature

• Measurement range -40 … 85 °C
• Accuracy is ±0.2°C

Relative humidity

• Accuracy is ±2%

Barometric pressure

• Measurement range 300 … 1200 hPa
• Absolute accuracy ±1hPa
• Barometric sensor precision ±0.002hPa

Ambient light

• Measurement is not calibrated
• Use only for indicative purposes

Hardware info

• Northbound interfaces: nRF52832 (Wirepas)
• Battery type: 2 x AA (replaceable)

Dimensions

• Width: 55.95mm
• Height: 26.88mm
• Length: 92.95mm
• Weight: 100 g

Environment info

• Operating temperature 5°C … +50°C
• Operating humidity 0% … 85% RH non-condensing
• Storage temperature 5°C … +25°C
• Storage humidity 45% … 85% RH non-condensing
• IP rating IP30

Certifications

• CE: Available
• FCC: Not yet available
• ISED: Not yet available

Thingsee AIR installation instructions

Using Thingsee AIR sensor

• Thingsee AIR is for indoor use only
• Environment humidity should be <85% RH at all time.
• Usage temperature range: +5 ºC to +50 ºC, non-condensing environments only.
• Please note that the correct TVOC and CO2 data are available only after the sensor device has conducted baseline calibration for the environment.
• TVOC sensor conducts baseline calibration for the TVOC levels and valid data is available after 24h of continuous use.
• Accurate CO2 baseline level is set by autocalibration during the first 8 days of usage. The autocalibration is based on the outdoor CO2 level. CO2 level in normal air pressure is 400 ppm.
• There must be “free of people” moments with full ventilation in the space, so the device works best in locations where there are no people 24h.

Note: Thingsee AIR requires ‘free of people’ moments in the space, when the indoor air is fully changed, to set the correct 400 ppm baseline. This is why places such as schools and offices are good places to use the sensor, as the baseline can be set during the night.

Note before installation

Please make sure the Thingsee GATEWAY is installed before you install the sensor.  To ensure strong enough signal strength for data delivery, keep the maximum distance between installed sensors under 20 m.If the distance between a measuring sensor and the Gateway is > 20m or if the sensors are separated by a fire door or other thick building materials, use extra sensors as routers to ensure adequate signal strength.

Things to avoid in installation

Avoid installing Thingsee products near the following

• Thick concrete structures or thick fire doors
•  Thick electrical wires
• Electrical transformers
• Escalators
• Nearby heating or cooling devices and/or vents
• Direct sun light
• Nearby halogen lamps, fluorescent lamps or similar lamps with hot surface
• Nearby radio equipment like WiFi routers or any other similar high power RF transmitters.
•  Avoid installing the sensor in close proximity to a spot where there’s people presence constantly, such as right next to workstations.

Installation

Open the box and follow the instructions of this user and installation guide. Take product from the box and open it with the opening key. Select a place where to install Thingsee AIR (see ‘Things to avoid in installation’ before) – recommended height 1,4 m – 1,8 m.

Take the B-cover and place it on the wall on the decided location. Screw the B- cover to the wall (use anchor with concrete wall or gypsum board. Place the batteries inside the A-cover.

Take A-cover and identify the product by reading the QR code in the side of the A-cover. To identify the device over Thingsee API, please follow the link for further information: https://support.haltian.com/api/open-services-api /api-sequences/

Attach the A-cover to the B-cover attached to the wall. (Make sure the Thingsee logo is right way).

Note: Make sure the sensor is installed max. 20 meters form the next sensor or gateway. This is to ensure full coverage mesh network between the sensors and the gateway.

Detection Capability

• CO2measurement range 400 – 5 000 ppm; extended range up to 10 000 ppm. Accuracy ±3% (In extended range ±10%)
• TVOC measurement range 0 – 600000 ppb. Resolution 1ppb at range 0ppb-2008ppb, 6ppb at range 2008ppb – 11110ppb, 32 ppb at range 11110ppb -60000ppb
• Temperature -40 ºC to + 85 ºC. Please note recommended operation temperature -0º C to +50 ºC. Accuracy ±0,2C.
• Relative humidity can be measured between 0-100% RH. Accuracy ±2%. • Barometric pressure can be measured between 300-1200hPa. Absolute accuracy is ±1hPa. Pressure sensor precision is ±0.002hPa in high precision mode.
• Ambient light sensing between 0-100k lux. Light level measurement not calibrated. Only for indicative purposes.

Default measurement and reporting

Event based reporting

• Measures every 5 minutes:
  • CO2
  • TVOC
  • Temperature
  •  Humidity
  • Barometric pressure
  • Ambient light
• Reports immediately when measured value has changed more than the set threshold value from previous reported measurement
  • CO2 default threshold value 10 ppm
  • TVOC default threshold value 30 ppb
  •  Temperature when absolute change 0,5 °C
  • Humidity when absolute change 2 %
  • Barometric pressure when absolute change 20 hPa
  • Ambient light when absolute change 10000

Time based reporting

• Reports all measurement values every 1 hours
• Reports battery-level every 6 hour

Other default settings

• Battery reporting interval 6 hours • Sensor is in routing mode

Changing the default settings

The following parameters are configurable remotely over Thingsee Operations Cloud

• Measurement interval
• Reporting interval
• Event based reporting thresholds
• Mesh network node role configuration
• Routing
• Non-routing

CERTIFICATION INFORMATION EU DECLARATION OF CONFORMITY
Hereby, Haltian Products Oy declares that the radio equipment type Thingsee AIR is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: thingsee.com Haltian Products Oy vakuuttaa, että radiolaitetyyppi Thingsee AIR on direktiivin 2014/53/EU mukainen. EU- vaatimustenmukaisuusvakuutuksen täysimittainen teksti on saatavilla seuraavassa internetosoitteessa: thingsee.com Thingsee AIR operates at Bluetooth® 2.4 GHz frequency band. Maximum radio-frequency power transmitted is +4.0 dBm.
Manufacturer name and address: Haltian Products Oy Yrttipellontie 1 D 90230 Oulu Finland
FCC REQUIREMENTS FOR OPERATION IN THE UNITED STATES
FCC Information for the User This product does not contain any user serviceable components and is to be used with approved, internal antennas only. Any product changes of modifications will invalidate all applicable regulatory certifications and approvals. FCC Guidelines for human Exposure This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 5 mm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
FCC compliance statement:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Safety guide and Warranty
Read these simple guidelines. Not following them may be dangerous or against local laws and regulations. For further information, read the user guide and visit www.haltian.com
Usage
For indoor use only.
Usage prohibited in moisture condensing environments. Do not cover the device as it prevents the device from operating properly. Remove the batteries from the device if you are taking it inside an airplane (unless you have the pre- installed pull-out tape still in place). The device has a Bluetooth LE receiver/transmitter which must not be operational during a flight.

• Please take care that the used batteries are recycled by taking them to appropriate collection point.
•  When changing batteries, replace both of them at the same time using identical brand and type.
• Do not swallow batteries.
•  Do not throw batteries into water or fire.
• Do not short-circuit batteries.
• Do not try to charge primary batteries.
•  Do not open or disassemble batteries.
•  Batteries should be stored in a dry place and at room temperature. Avoid large temperature changes and direct sunlight. At higher temperature the electrical performance of the batteries may be reduced.
• Keep batteries away from children.
• Care and maintenance Handle your device with care. The following suggestions help you keep your device operational.
• Do not open the device other than as instructed in the user guide.
• Unauthorized modifications may damage the device and violate regulations governing radio devices.
• Do not drop, knock, or shake the device. Rough handling can break it.
• Only use a soft, clean, dry cloth to clean the surface of the device. Do not clean the device with solvents, toxic chemicals or strong detergents as they may damage your device and void the warranty.
• Do not paint the device. Paint can prevent proper operation.

Damage
If the device is damaged contact support@haltian.com. Only qualified personnel may repair this device.
Small children

Your device is not a toy. It may contain small parts. Keep them out of the reach of small children.
RECYCLING
Check the local regulations for proper disposal of electronic products. The Directive on Waste Electrical and Electronic Equipment (WEEE), which entered into force as European law on 13th February 2003, resulted in a major change in the treatment of electrical equipment at end-of-life. The purpose of this Directive is, as a first priority, the prevention of WEEE, and in addition, to promote the reuse, recycling and other forms of recovery of such wastes so as to reduce disposal. The crossed-out wheelie-bin symbol on your product, battery, literature, or packaging reminds you that all electrical and electronic products and batteries must be taken to separate collection at the end of their working life. Do not dispose of these products as unsorted municipal waste: take them for recycling. For info on your nearest recycling point, check with your local waste authority.

References

• All devices and gateways | Haltian
• Connected solutions for successful businesses | Haltian
• Connected solutions for successful businesses | Haltian

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>