JHOME JH-01 Zigbee Smart Plug User Manual
- June 5, 2024
- JHOME
Table of Contents
JHOME JH-01 Zigbee Smart Plug
Product Parameter
Model: JH-01 zigbee
In/Out:125V AC/50/60Hz
Max.Current: 10A
RF Standard: Zigbee IEEE 802.15.4
Powered by:Live and Neutral
Material: pc,ABS VO
Weight: 60g
Size: 48X48X52mm
Distinguishing Feature
- Without other Zigbee hub, directly support Amazon Echo Smart Speaker to config the controller. After paired, you can use theAlexa APP or Voice to control the device.
- Support access to Samsung SmartThings hub, Amazon Echo Plus, Amazon Echo Show(2nd) ,eWeLink hub or other HA and 3.0 hub.
- Zigbee plug can be controlled by the button on itself.
Configuration Steps
Works with Amazon Alexa
- Confirm that the Blue LED of Zigbee Plug is flashing.If the indicator is always on, press and hold the button until it is flashing or powered off the Zigbee Plug and then power on for 3-8s. Repeat five times, then the Plug enter config mode, the Green LED will flash
- Ask,“Alexa, discover my devices.
- Wait for the Zigbee Plug Blue LED indicator to be always on, and the Plug is connected to echo plus or echo show(2nd).
- Ask,“Alexa, tum on first plug.”This will tum the Plug on
- You can use Amazon Alexa App to and group,routines of modify device names such as bedroom plug,At this point you can use Alexa App or Voice to control the devices.
Work with Samsung SmartThings hub&Amazon Alexa
- Confirm that the Blue LED of Zigbee Plug is flashing.If the indicator is always on, press and hold the button until it is flashing or powered off the Zigbee Plug and then power on for 3-8s. Repeat five times, then the Plug enter config mode, the Green LED will flash.
- Open the SmartThingS App and add the Zigbee plug.When the green LED indicator is always on ,the plug has bee added to the smartThings hub,If the App does not recognize the device type, please refer to the SmartThings Confign, pdf document.
- Enable SmartThings Skill in the Amazon Alexa APP or alexa.amazon.com
- Ask, “discovery my devices.” can add zigbee Plug to amazon smart home.
- You can use SmartThings App or Amazon Alexa APP to add group, routines or modify device names such as bedroom plug,At this point you can use Alexa App or Voice to control the devices.
SmartThings App and Alexa App operation (Add device, group, routines)
* Alexa APP
-
In the Alexa App interface click“+” icon, You can add devices and groups. In the device list interface you can control or modify the device type and name, as shown in the following picture
-
In the Alexa App Smart Home interface you can operate the devices conveniently
-
In the Alexa App routines interface you can set up some devices and events(Ask,“Alexa, good morning,”It will turn on the bedroom lights,open the curtains, and forecast the weather,traffic conditions, to-do items, etc..）
SmartThings App
-
Click“: +”to add or reset the device at the upper right corner on the all device list screen in the smartThings APP.
-
Select“Add Device”in the pop-out window
-
Select“eWelink”icon to add device on the add device screen
-
Click“Next”on the default hub connection interface
-
Choose the room you want after entering this interface ,or click“add new room”then click “next”
-
Do what app tells you and wait patiently
-
After the device is successfully connected， name the device andclick“Done”
-
Return to the main interface, device has been added, and you will see the device and you can begin to set.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC warning:
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordanc with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>