Rhizmall IJPSCHRT01 Apai Genie The Smart Personal Robot Cameraman User Manual
- June 5, 2024
- Rhizmall
Table of Contents
IJPSCHRT01 Apai Genie The Smart Personal Robot Cameraman
User Manual
Install Battery
Unscrew the battery cover and insert 3x “AA” batteries according to the
direction marked on the battery case. Put back the battery cover.
Install Mobile Phone
Open the phone holder and slide the phone into the phone holder by making the
phone lens face you, and adjust the phone to make it suitable.
Horizontal and Vertical
Switching Loosen the knob, release the phone holder and rotate it to
horizontal or vertical mode. Tighten the knob to install the phone.
Power On for Use
Long Press Power Button: power on/off, the LED light flashing/out Downloading
APP Scan the QR code located in the instruction book or search “Apai Genie” in
the App Store or Google Play Store to download and install the app.
Connecting Device
- Make sure the 360°Object Tracking Holder is ON, the red light flashing, and the Holder is waiting for the Bluetooth connection
- Make sure the Bluetooth on your device is ON
- Launch the Holder Apai Genie companion app and within 6 seconds, the Holder will automatically connect to your device.
NOTE: There is no need to manually pair the device via Bluetooth
Shooting
- Selecting Facial or Object Tracking Mode The Tracking Selection Icon is located at the top of the screen. Tap the icon to select Face Tracking or Object Tracking.
- Facial Tracking Mode 1. Photograph Follow: pose and wait for 3 seconds, it can automatically start taking photos. 2. Video Follow: pose and wait for 3 seconds, it can automatically start the recording. 3. Pair Mode: two faces draw close and wait for 3 seconds, it can automatically start taking photos
- Object Tracking Mode
- Photograph Follow: Double click the selected target on the camera interface and wait for 3 seconds, it can automatically start taking photos.
- Video Follow: Double click the selected target on the camera interface and click the video button, it can start video follow.
Main Function Introduction
- Recording control
- Object Tracking
- Facial Tracking
Get to Know ApaiGenie
https://apps.apple.com/cn/app/apai-genie/id1484973882
https://play.google.com/store/apps/details?id=qmcx.com.trackercamera
FCC STATEMENT :
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF warning statement:
The device has been evaluated to meet general RF exposure requirements. The
device can be used in portable exposure conditions without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>