User Manual.

Sports Bluetooth headset
ZLS-B01

At a Glance

1.   Power button
2.   Led status indicator
3.   MIC
4. Micro-USB charging port
5. Sponge headphone cover

Specifications

Model: ZLS-B01
Dimensions: Hat: 31.5*24.5cm: Headphones: 3.52.8cm
Bluetooth Standard: V5.1 TWS
Operating Range: 33 feet/10 meters (No obstacles between)
Supporting Protocols: A2DP / HFP / HSP / AVRCP
Charging Time: 1.5 hours
Playing Time: 6 hours
Battery Type: 21 OmAh Li-polymer, 3.7v

Operating Instructions

Charging the Headphones
The headphone MUST be fully charged before using for the first time.

• Connect the provided charging cable to your headphones and connect it to a suitable charging device (powered USB port of a computer or a USB/AC adapter).
• The red indicator light will be on while charging. when it completes the charge, the light turns green.
• Disconnect cable when charging is completed.

The headphones turn off automatically while charging.

To protect the battery life, the headphones should be charged every 3 months

at least if it’s not been used for a long time.

Bluetooth Pairing
Pairing both headphones

• Turn on the Bluetooth of your phone or other Bluetooth devices.
• For both headphones, press and hold the Power Button for 3 seconds to turn it on. The LED indicator lights will flash alternately red. green and blue when ready to connect. The headphones will turn off if they did not get connected in 1 minute.
• In the list of found Bluetooth devices in your phone or other Bluetooth devices. select “ZLS-B01” to pair. The indicator lights turn to blue when the headphones are connected.

Notes

The headphones will automatically connect to the last paired Bluetooth

device when they are turned on. # If pairing failed, turn off the headphones and do the pairing operations again.

Pairing one headphone
You can use both headphones simultaneously or use either of the two alone. Turn on only one headphone to use one headphone. The pairing method is the same as above.

Functions

Pause and resume While the power is on. press one time the power button to pause the music. Press the power button again to resume the music. Answer an incoming call When there is an incoming call, press the power button the answer the call and press it again to hang up. Activate voice control of the phone When the headphones are connected to your smartphone, double press quickly to activate the voice control of the phone. (This function works only when your phone has a voice control function; please refer to the instructions of your phone for details.)

Functions

Pause and resume While the power is on. press one time the power button to pause the music. Press the power button again to resume the music. Answer an incoming call When there is an incoming call, press the power button the answer the call and press it again to hang up. Activate voice control of the phone When the headphones are connected to your smartphone, double press quickly to activate the voice control of the phone. (This function works only when your phone has a voice control function; please refer to the instructions of your phone for details.)

Installation

Open the package and take out the products.

Rotate the headphones counterclockwise and separate the headphones from the sponge covers, then take them out.

Put the sponge cover on the inner side of the beanie hat. then rotate the headphone and fix it.

Warranty

One-year warranty. We promise an unconditional refund or replacement if there are any problems or defects with the product within this timeframe.

FCC Statement

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

–Reorient or relocate the receiving antenna.
–Increase the separation between the equipment and receiver.
–Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
–Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Radiation Exposure Statement
This device complies with RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>