ASETEK 645LT AIO Liquid Cooler User Guide

June 5, 2024
ASETEK

ASETEK-645LT-AIO-Liquid-Cooler-logo

ASETEK 645LT AIO Liquid Cooler

ASETEK-645LT-AIO-Liquid-Cooler-product

SAFETY INFORMATION

  • The liquid cooler MUST be installed with care and precisely as described in the installation guide.
  • Changes or modifications to the liquid cooler are not allowed and will void certifications and warranty.
  • Turn off your computer and disconnect from mains before mounting any parts of the liquid cooler.
  • Do not attempt to mount this liquid cooler on any other parts than explicitly instructed.
  • In case of leakage from the liquid cooler, do not use the cooler. Instead follow the instructions in the Asetek warranty for returning the liquid cooler to Asetek for repair or replacement.
  • In case of malfunction, immediately turn of the computer and remove the liquid cooler. If the liquid cooler is within the warranty period, follow the instructions in the Asetek warranty for returning the liquid cooler to Asetek for repair or replacement.
  • Do not mount this liquid cooler with fixing clamps or other means that may prevent free flow in the system.
  • Do not exceed the technical performance data specified for the liquid cooler.
  • Do not use other electrical connection than instructed in manual. Applying wrong voltage may cause fire in the system.

WHAT’S IN THE BOX:

FCC Compliance Statement

FCC Part 15, Subpart B Unintentional Emissions Interference Statement
Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules and Industry Canada ICES-003. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

This class B device complies with part 15 of the FCC rules and Industry Canada ICES-003. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation.

IMPORTANT! Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
CE Conformity
Product bearing the CE marking comply with the following EU directive as may be applicable:

  • Directive 2014/30/EU (EMC Directive)
  • Directive 2014/35/EU (LVD Directive)
  • Directive 2015/863/EU (RoHS 3 Directive)

Compliance with this directive is assessed using applicable European Harmonized Standards.The point of contact for regulatory matters is Asetek AS, Assensvej 2, 9220 Aalborg East, Denmark.
WEEE (Waste Electrical and Electronic Equipment) Statement
To protect the global environment Asetek would like to remind you to dispose of this product according to local regulations.

Step by step in case of product malfunction:

  1. If the malfunction has happened within the first month after purchase, contact Amazon Support.
  2. If the malfunction has happened after the first month after purchase, contact Asetek Support.

For purchases not made through Amazon

  1. Contact Asetek Support
    • A description of the issue.
    • Date of purchase.
    • Proof of purchase.
  2. Instances not covered by Asetek
    • Thermal paste dryout.
    • Visual alterations to the cooler.
    • Liquid dissipation through tubes.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals