CLA Lighting SENS011 Microwave Sensor Instructions
- June 3, 2024
- CLA Lighting
Table of Contents
CLA Lighting SENS011 Microwave Sensor Instructions
Specification
TESTING IN DAYLIGHT:
-
Turn the LUX dial clockwise to MAXIMUM (sun). Turn the SENS dial clockwise to MAXIMUM (+). Turn the TIME dial anti-clockwise to MINIMUM (10s)
-
Switch on the power: The light fitting will turn on and 10sec±3sec later, the light will turn off automatically. If the sensor detects movement, the light will turn on again.
-
If no additional movement is detected after 10s (time pre-set in TIME dial for testing purpose), the light will turn off. If the sensor receives a new induction signal before the 10 seconds are up, the timer will restart from when the last movement was detected.
TESTING AT NIGHT:
- Turn LUX dial anti-clockwise to MINIMUM (3). If the ambient light is less than 3LUX, the light will turn on when movement detected.
- If no additional movement is detected after 10s (time pre-set in TIME dial for testing purpose), the light will turn off. If the sensor receives a new induction signal before the 10 seconds are up, the timer will restart from when the last movement was detected.
Once testing is complete, adjust the LUX, SENS and TIME dials as desired.
BROCHURE UPDATED ON 15.02.2021
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>