Butterfly EKN 1.5-Litre Electric Kettle Instruction Manual
- June 3, 2024
- Butterfly
Table of Contents
Butterfly EKN 1.5-Litre Electric Kettle
IMPORTANT SAFETY INSTRUCTIONS
- This appliance is designed for domestic use only not for commercial applications.no responsibility is accepted for damage resulting from improper use or non-compliance with the instructions.
- Please keep these instructions for future reference. If the appliance is passed to another person.this instruction manual should accompany it.
- Before inserting the main plug into the socket,check that the main supply voltage and current,Rating corresponds with the power supply details shown on the appliance model label.
- Never allow the heating base or the kettle to make contact with or be immersed in water.However,should this happen,have the unit examined by a qualified personnel.including the replacement of the power cord.if required ,please send the appliance to our Customer service department.
- Do not operate the appliance if–the appliance or power cord shows any signs of damage,–the appliance has been dropped.
- Always remove the plug from the wall socket-after use—in case of any malfunction,—before cleaning.
- When removing the plug from the wall socket,never pull on the power cord.
- Children do not recognize the dangers that may occur when operating electrical appliances:Therefore keep children away from such appliances.
- Do not attempt to remove any parts of the housing nor insert any metal objects into the interior of the appliance.
- To prevent damage to the power cord ,do not let it pass over sharp corners or edges.
- Do not expose the appliance to rain or moisture and do not operate the appliance outdoors or with wet hands.
- Use only clean cold water,and let the water run for approx two minutes before filling.
The appliance operates at very high temperatures.Caution :there is danger of scalding from escaping water or steam.Do not touch any part of the kettle except the handle(when the appliance is in use and ensure that the lid is properly screwed).This appliance is designed for heating water only. Never put any other liquid into the kettle.
CLEANING AND CARE
- Before cleaning the appliance.ensure it is disconnected from the power supply and has cooled down completely.
- Do not use abrasives or harsh cleaning solutions.
- Do not immerse the base or the kettle in any liquid.to clean the exterior.a slightly damp,lint free cloth may be used.
- It is advisable to remove lime deposits from the kettle at’ regular intervals.
SPECIFICATIONS AND FEATURE
- Supply voltage.: 230V 50Hz
- power consumption: 1500W
- Volume:Max 1.5L
WARNING
- DO NOT IMMERSE IN ANY LIQUID.
- For kettle which is used with a connector in operating a thermostat that only the appropriate connector must be used.
- lf the kettle is overfilled.Boiling water may be ejected.
- The kettle is only to be used with the stand provided.
- lf the supply cord is damaged it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avojd a hazard.
OPERATION GUIDELINES Before using for the first time
-Prior to initial use,clean it by going through several bolling cycles,using clean water with each cycle and filling the kettle to its upper marking.The water will reach boil ling point after approximately 5minutes,when the unit switches off automatically.
OPERATION
- Place the heating base on a firm and level surface.
- Pour the desired amount of clean water into the kettle hold the handle when the appliance is in use.and ensure that the lid is properly closed.The amount of water can be measured by the level mark on the outside of the kettle.Always pay attention to the minimum and maximum levels and ensure that the lids fare properly and firmly closed.
- Position the kettle in such a way on the base that the underside of the kettle fits precisely into the contact on the base.
- Insert the plug into a wall socket
- Put the on/off swifch to its “ON” position to start the heating process, the indicator lamp will Light up.
- As soon as the water reaches bollinq point,the on/off switch return automatically to the OFFposition,the indicator lamp will go out .The water kettle can also be switched off manually by putting the on/off switch to the OFF position.
- Thjs kettle is equipped with a safety cut out to protect the appliance from damage in case of Inappropriate use,should the appliance be accidentally operated without water or if all the water has evaporaped the safety cut out will automatically switch off the heating element.
- In such a case remove the plug from the wall socket immediately and refill the kettle only after an adequate cooling down period,about 15-20seconds.
DECLERATION
- Should the appliance switch off before reaching boiling point this is a sign that decalcifying isNecessary.
- Any regular descaling agent may be used,provided the relevant instructions are observed,Do not fill the kettle to the upper mark to avoid spillage if the descaling agent causes the water to foam.
- To clean the kettle thoroughly of any decalcification residues let it go through several boiling cycles using clean water with each cycle,Rinse the kettle with clean water afterwards.
For customer feedback and complaints, please contact
M/s. Butterfly Gandhimathi Appliances Limited, No. 143, Pudupakkam Village,
Vandalur – Kelambakkam Road, Chengalpattu District – 603 103. Tamil Nadu,
India.
E-mail : service@butterflyindia.com
Web : www.butterflyindia.com
Read User Manual Online (PDF format)
Loading......