CORSAIR RGP0119 Pro Wireless Charging Mouse Instructions
- June 5, 2024
- Corsair
Table of Contents
CORSAIR RGP0119 Pro Wireless Charging Mouse Instructions
PRODUCT SAFETY GUIDELINES\
IMPORTANT INFORMATION
Read the Quick Start Guide before using this product and refer to the Warranty
Guide for warranty and service information. If damage is caused by failure to
follow any of the instructions or guidelines, the warranty
does not apply.
PRODUCT SAFETY GUIDELINES
- Use this product in accordance with the Quick Start Guide and manufacturer instructions.
- Charge this product only with the included USB charging/data cable and a USB port on your PC.
- Use and store this product in a room temperature controlled environment.
- Use this product only with CORSAIR approved accessories.
- Unplug this product when unused for a long period of time or during power-related events such as a power outage or lighting storm.
- Refer this product to qualified service personnel in the event that it and/or included accessories have been damaged and/ or do not function properly.
- DO NOT cover, block any ventilation openings, or use this product in a confined space.
- DO NOT use near or expose this product to liquids, and power it off immediately if liquids come in contact.
- DO NOT insert foreign objects into product openings
BATTERY SAFETY GUIDELINES
This product is battery powered. If the battery type is specified as Lithium-
based, then:
– DO NOT attempt to remove the battery, it is non-user serviceable.
– DO NOT attempt to replace the battery, instead contact CORSAIR Customer
Support for repair or replacement information.
– DO NOT dispose of this product in household waste bins.
– CORSAIR MEMORY, Inc encourages customers to recycle used electronic hardware
and rechargeable batteries in accordance with local laws and regulations.
CAUTION
– Failing to follow all safety guidelines may result product damage,
explosion, fire, and/or electric shock.
– The manufacturer is not responsible for any radio or TV interference caused
by unauthorized modifications to this equipment. Such modifications could void
the user authority to operate the equipment.
RISK OF SHORT CIRCUIT OR FIRE!
– Before you connect the product to a power socket, ensure that the power
voltage matches the value printed on the back or bottom of the product. Never
connect the product to a power socket if the voltage is different.
– Never place the product or any objects on power cords or on other electrical
equipment.
– If the product is transported in temperatures below 5 degrees Celsius,
unpack the product and wait until its temperature matches room temperature
before connecting into a power socket.
RISK OF OVERHEATING!
– Never install this product in a confined space. Always leave a space of at
least four inches around the product for ventilation.
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) This device may not cause interference, and
(2) this device must accept any interference, including interference that may
cause undesired operation of the device.
This Class B digital apparatus meets all requirements of the Canadian
Interference-Causing Equipment
Regulations. CAN ICES-3(B)/NMB-3(B)
Radiation Exposure Statement:
The product comply with the Canada portable RF exposure limit set forth for an
uncontrolled environment and are safe for intended operation as described in
this manual. The further RF exposure reduction can be achieved if the product
can be kept as far as possible from the user body or set the device to lower
output power if such function is available.
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate this equipment.
This product complies with the FCC portable RF exposure limit set forth for an
uncontrolled environment and are safe for intended operation as described in
this manual. The further RF exposure reduction can be achieved if the product
can be kept as far as possible from the user body or set the device to lower
output power if such function is available.
Read More About This Manual & Download PDF:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>