MAICHARGING Charging Station – 3-in-1 Charging Dock User Manual

MAICHARGING Charging Station – 3-in-1 Charging Dock User Manual

Attention

Please pay attention to the following instructions to prevent the device from overheating, intermittent charging, or malfunction.

1. Place the phone/watch in the center of the charging area (as pictured).
2. In order to maximize concurrent charging capabilities with 3 devices, we recommend to connect your MaiCharging device with a quick charging adapter (9V/1.67A).
3. The charging distance is 2-10 mm. Remove any protective case over 3 mm thick.
4. The watch charger is temperature controlled. When the temperature reaches 40°C (104 degrees Fahrenheit), it will stop charging automatically.
5. No metal or magnetic objects can be within 6 cm of the back center of the phone while it is charging.
6. Room temperature affects charging speeds. The lower the temperature, the faster items will charge.
7. Avoid charging in hot, humid environments as this could damage the circuit.
8. Keep device out of the reach of children to avoid any unnecessary accidents.

Specification

• Input: 5V / 2A, 9V / 2A
• Output phone: 5W-7.5W-10W
• Output watch: 2W
• Output earphone: 3W
• Net Weight: 152g
• Charging distance: .10mm
• Charging efficiency: a72°/0
• Frequency: 110-205KHz
• Size: 20.589.5cm

Connect to Power Adapter

*Power Adapter not included

Package Includes

• Wireless charger
• 100cm USB-A to Type-C power cable
• User manual
  *Power adapter to be purchased separately

Charging Mobile Devices

1. With MaiCharging plugged into a power source, place your mobile devices onto the unit.
2. The LED indicator light will appear blue while charging. When your phone is fully charged, the light will turn green. (When Samsung phones are fully charged, the MaiCharging Dock LED will light up in GREEN. For any other phone the LED will be BLUE when charging and when full.)

Compatibility

• Apple phone: iPhone 8/8 Plus/X/XR/XS/11 Pro/11 Pro Max/11/SE
• Samsung phone: Note5/5+/6/6+/7/7+/8/8+/9/9+/10/10+/S6/S6 edge/S6 edge+/S7/S7 edge/S8/S8+/S9/S9+/S10/S10+/S20
• Watch: supports Apple Watch Series 1 – 5
• Headphones: DangoBuds

FCC Statement

This device complies with part 15 and part 18 of the FCC Rules. Operation is Subject To the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not explicitly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

Note: this equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 and part 18 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and candidate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• orient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/ TV technician for help.

The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. During the operation of device a distance of 15 cm surrounding the device and 20 cm above the top surface of the device must be respected.

This device complies with Part 18 of the FCC Rules. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Increase the separation between the equipment and any other radio device.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>