SATECHI 200W GaN USB Charger with Ports Instruction Manual
- June 15, 2024
- SATECHI
Table of Contents
SATECHI 200W GaN USB Charger with Ports Instruction Manual
-
Connect the included C5 power cable to the C5 connector on the rear of the charger.
-
Plug the power cable directly to a power outlet.
-
The LED Indicator light will Illuminate white when receiving power
-
The 200W charger can be laid flat horizontally on the supported rubber feet or vertically using the included Desktop Stand.
-
Plug in cables (sold separately) to the charger’s USB-C PD ports. We always recommend using certified charging cables. EMARK cables are required to reach wattage above 60W.
-
Connect and charge up to six USB-C devices simultaneously Total max output: 200W. When connecting devices to all six PD ports, connect your largest device to the PD1 port.
CHARGING -
When connected to PD1 or PD2, supported device can charge with a max output of 140W.Only one device can be connected at a time to either port in order to achieve 140W charging. USB-C to MagSafe 3 Cable must be used in order to achieve 140W output through PD1 or PD2.
-
When connected to PD3 or PD4, supported device can charge with a max output of 100W.
-
When connected to PD5 or PD6, supported device can charge with a max output of 20W.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>