Shenzhen Yunlaite Technology AB Shutter3 Remote Shutter User Manual

Shenzhen Yunlaite Technology AB Shutter3 Remote Shutter User Manual

Specifications

Overview

1. LED Light
2. IDS Button
3. Android Button
4. ON/OFF Switch

Battery

Positive pole upwards to install the battery.

How to use

Easy to set up, Easy to use

1. Paring
   a) When turning on the Remote Shutter by switching the ·oN/OFP’ button to “ON” ,the led light will flash three times.
   b) Waiting about 10-30s, the “AB Shutter3″will enter into pairing mode.
   c) Tum on Bluetooth on your phone to pair the shutter.(Note: please make sure unpair all other Bluetooth devices before pairing with this shutter.)
   d) Check the list of available Bluetooth devices, tap the device named ” AB Shutter3″ to pair with it. It should pair shortly after.

2. Open App
   e) For iPhone: Use with your phone’s built-in camera App. For Android: Use with your phone’s built-in camera App. If it doesn’t work, download and use “Camera 360” from Google Play.

3. Shooting Photos

There are two buttons on the remote control. For iPhone press the 1OS button to taking photos; For Android press the Android button to taking photos.

NOTE:

1. The LED lights blue once when you press the button once, it indicates that the devices is work properly. Otherwise the battery may have consumed out, you may need to replace the battery.
2. Please working distance of remote control within 393.7 inch(10m)

FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. RF Exposure Information The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>