Shenzhen Itrybrand Technology VT05S GPS Vehicle Tracker User Guide

Itrybrand Technology VT05S GPS Vehicle
Tracker User Guide

At a Glance

Overview
Accessories
Power cabte/Relay
Wiring Diagram

Getting Started

Installing the SIM card
Important 1 A SIM card is required in order to use cellular services when connecting to GSM networks.
2 Keep the SIM card GPRS availabiity
3 Note dawn the SIM card phone numbers which are device contacting numbers. Open the side plug, install the SIM card In the right direction, tvm on the device.

Setting up and activating the device
To set up and activate the device, you should send SMS to devise numbers by mobile phone.
Setting server
SMS: SERVER, 1 fvt05s.pro1rack365.conxfia42<04

Installing the device
Connect according to wires to your car by referring to Wiring Diatom In Chapter 1.3

Install ttie device in the following three suggested places: Important 1 Make It covert for security factors.
2 Keep away from high power electrical devicesrsucti as reversing radar,anfl- theft devices or other vehicle communication equipment which may affect the device signal.
3 Keep the device front face up&No metallic cases above ttie a device which may affect signal as well Such as the windshield which 1$ pasted with metal formal-protective coating or heating coating.

Checking location

Via SMS
WHERE#
Via tracking platform
www.proirack365.com
Ask your distributor for a log-in account and password.

Basic

LED indication

Red LED -Power status

Green LED -GSM status

Blue LED -GPS status

Alarm management

*When any kind of alarm happened, the device will send alarm SMS&CALL SOS numbers.

Vibration Alarm
When ACC is off and some vibration happened, the device will alarm.
Cut-off alarm
When external power is cut, the device will alarm.
Geo-fence alarm
After setting the geofence range, if the device comes in&out the range, it will alarm.
Low-power alarm
When external power is cut, the device will keep working with its backup battery and when its battery is too low, the device will alarm.
Movement alarm
When ACC is off, if the vehicle is moved, the device will alarm.

Troubleshooting

When a device in the background displays not online or off-line., First observe the device 3 indicator is normal, according to the device lights status to judge the device’s work condition, if the red light flashes, the green light is not bright please check that the SIM card is installed correctly if the installation is no problem, please replace-the SIM card test again. Under no condition to observe the situation, use mobile phone dial SIM card device number, if not connect successful, indicating that the device Area is no GSM  signal or signal is weak, please fry it again in a good signal place; if the device is an insufficient balance or out of service, please try again after recharge; if connect successfully, please consult ttie appropriate operator if the SIM card is open GPRS function; if not connected, prompt power off, please check that the device is installed properly.

When the GPS signal reception is abnormal, please take it into ■the broad place positioning, general first positioning need 1-2 minutes. If a long time does not position,  please check the device installation location if meets the requirements, the normal installation without metal shielding.

When the GSM signal reception is abnormal, please check the device’s SIM card is installed correctly; or the location may not cover where signal coverage.
GSM signal (such as a basement), please use in the place
When power-up, the red power light is off, please check the wiring is correct, and after excluding the internal device problem then can power up again.

Maintain Information

Customer Name:_____ Tel:__ Add:__ IMEI;____
Purchase Date:__

Tel: Add: IMEI;

FCC Warning
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the  user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Radiation Exposure Statement
To comply with FCC RF exposure compliance requirements, this grant is applicable to only mobile configurations. The antennas used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.

References

• proirack365.com
• proirack365.com/

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>