Hangzhou Qingruxu Network Technology RXFL8019 Ceiling Fan Installation Guide

Hangzhou Qingruxu Network Technology RXFL8019 Ceiling Fan

WARM TIPS

1. Please install according to the instructions when installing.
2. We suggest you ask a professional technician for help if you are not good at installing.
3. lnstallation must be performed only after powering off or switching off.
4. Do not poke any objects or fingers through the protective screens.
5. Do not place any objects, such as clothing, on the device.
6. Be careful with long hair. These can be sucked in by the air flow.
   Keeping sufficient distance

Package Include

1. Ceiling fan with light
2. Remote control (without batteries)
3. Flat Phillips Screw
4. Hanging Plate
5. Pointed Screws and Drop in Anchors
6. Screws for hanging the remote control

PRODUCT PARAMETERS

Recommend to Use Ordinary WalI Switch

Our fan light can only be controlled by a single switch, and can not control the light and fan separately,

Function Test

1. Don’t install the fanlight, put it flat and check the product function firstly.
2. When your remote control or app is unavailable, follow these steps to test the wall switch before using it.
3. How to test: Power on – Power off Power on – Power off Power on

How to installation

1. Remove the screws of the hanging plate
2. Remove the hanging plate counterclockwise
3. Install the hanging board on the ceiling and fix it with screws (Pointed Screws+Drop in Anchors)
4. The brown wire is connected to the live wire, and the blue wire is connected to the neutral wire.
5. Install the fanlight on the hanging plate clockwise
6. Fix with four Flat Phillips Screws

Meters Smart Remote Control

1. Light switch
2. Low speed
3. Medium speed simultaneously
4. High speed
5. Fan off
6. Brightness+
7. Brightness –
8. Adjust color temperature
9. Cyclic air supply mode
10. Long-press can get fast-acting.

Normally, you can use the remote control directly.In case, there are code matching steps:

1. Batteries in the remote controller fristly;

2. Power on;

3. Within 3-5 seconds, press button O(light switch)
   and button (High speed), paired after the lamp flashes or beeps;

4. Key functions please refer to the remote control manual for details.

2.4G fan lamp mobile app user manual

Preparing

1. Use your phone to scan the QR code on the left to download the app.
2. Make sure the phone is connected to the network
3. Make sure Bluetooth is on;
4. Make sure the lamp is power connected;
5. Match the remote controller and APP then install the fan light.

When using the wall switch, the Iight does not light up

1. Check whether the line of the light board is loose.
2. Check whether the driveline is loose.
3. It is also possible that the wiring with the light source inside has fallen off.
4. the light must be disassembled and check.
5. If the light still does not work, it is usually necessary to replace it with a new light source.

When using the wall switch, the fan is not running

1. Check whether the motor wire is loose.
2. Check whether the drive line is loose.

Warranty Services

2-Year warranty services are provided for this product, If you have any problems during the warranty period, please feel free to contact us via email mall, your order ID and detail are preferred so that customer support will help faster.
Note: please use this product accordingly to its intended purpose, do not retrofit or remodel the product. The warranty does not cover if the faillure is caused by the third
party product, or natural disasters.

FCC Caution

Labeling requirements.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Information to the user.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/V technician for help.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>